EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Correlation between Dental Composite Filler Percentage and Strength, Modulus, Shrinkage Stress, Translucency, Depth of Cure and Radiopacity

Carolina Lopez, Bushra Nizami, Augusto Robles, Snigdha Gummadi, Nathaniel C Lawson iD

Materials · 06.08.2024 · 17 (16) · 3901

DOI: 10.3390/ma17163901 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Materials, online erschienen am 06.08.2024. Verfasst von Carolina Lopez und 4 weiteren Autor:innen. Beteiligte Einrichtung: Private Practice, Bogota 110110, Colombia. Die Arbeit wurde bisher 30-mal zitiert (Crossref) und nennt 34 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Filler content in dental composites is credited for affecting its physical and mechanical properties. This study evaluated the correlation between the filler percentage and strength, modulus, shrinkage stress, depth of cure, translucency and radiopacity of commercially available high- and low-viscosity dental composites. Filler weight percentage (wt%) was determined through the burned ash technique (800 °C for 15 min). Three-point bend flexural strength and modulus were measured according to ISO 4049 with 2 mm × 2 mm × 25 mm bars. Shrinkage stress was evaluated using a universal testing machine in which composite was polymerized through two transparent acrylic rods 2 mm apart. Shrinkage was measured from the maximum force following 500 s. The translucency parameter (TP) was measured as the difference in color (ΔE00) of 1 mm thick specimens against white and black tiles. The depth of cure was measured according to ISO 4049 in a cylindrical metal mold (4 mm diameter) with a 10 s cure. Radiopacity was measured by taking a digital X-ray (70 kVp for 0.32 s at 400 mm distance) of 1 mm thick specimens and comparing the radiopacity to an aluminum step wedge using image analysis software. The correlation between the filler wt% and properties was measured by Pearson’s correlation coefficient using SPSS. There was a positive linear correlation between the filler wt% and modulus (r = 0.78, p < 0.01), flexural strength (r = 0.46, p < 0.01) and radiopacity (r = 0.36, p < 0.01) and negative correlation with translucency (r = −0.29, p < 0.01). Filler wt% best predicts the modulus and strength and, to a lesser extent, the radiopacity and translucency. All but two of the high- and low-viscosity composites from the same manufacturer had statistically equivalent strengths as each other; however, the high-viscosity materials almost always had a statistically higher modulus. For two of the flowable composites measured from the same manufacturer (3M and Dentsply), there was a lower shrinkage stress in the bulk-fill version of the material but not for the other two manufacturers (Ivoclar and Tokuyama). All flowable bulk-fill composites achieved a deeper depth of cure than the flowable composite from the same manufacturer other than Omnichroma Flow Bulk.

Schlagwörter

Stichwörter der Autor:innen

depth of curemodulusradiopacityshrinkage stressstrengthtranslucency

Autor:innen und Institutionen

  • Private Practice, Bogota 110110, Colombia.
  • Division of Biomaterials, School of Dentistry, University of Alabama at Birmingham School of Dentistry, Birmingham, AL 35209, USA.
  • Division of General Dental Sciences, School of Dentistry, University of Alabama at Birmingham School of Dentistry, Birmingham, AL 35209, USA.

ORCID-Profile: Nathaniel C Lawson

Zitieren

APA

Lopez, C., Nizami, B., Robles, A., Gummadi, S., & Lawson, N. C. (2024). Correlation between Dental Composite Filler Percentage and Strength, Modulus, Shrinkage Stress, Translucency, Depth of Cure and Radiopacity. Materials, 17(16), 3901. https://doi.org/10.3390/ma17163901

Vancouver

Lopez C, Nizami B, Robles A, Gummadi S, Lawson NC. Correlation between Dental Composite Filler Percentage and Strength, Modulus, Shrinkage Stress, Translucency, Depth of Cure and Radiopacity. Materials. 2024;17(16):3901. doi:10.3390/ma17163901

BibTeX
@article{Lopez2024,
  author = {Lopez, Carolina and Nizami, Bushra and Robles, Augusto and Gummadi, Snigdha and Lawson, Nathaniel C},
  title = {Correlation between Dental Composite Filler Percentage and Strength, Modulus, Shrinkage Stress, Translucency, Depth of Cure and Radiopacity},
  journal = {Materials},
  year = {2024},
  volume = {17},
  number = {16},
  pages = {3901},
  doi = {10.3390/ma17163901}
}
Kostenlos starten →