EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Evaluation of Shear Strength and Stiffness of a Loess–Sand Mixture in Triaxial and Unconfined Compression Tests

Matylda Tankiewicz iD, Magdalena Kowalska iD, Jakub Mońka

Materials · 02.08.2024 · 17 (15) · 3831

DOI: 10.3390/ma17153831 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Materials, online erschienen am 02.08.2024. Verfasst von Matylda Tankiewicz und 2 weiteren Autor:innen. Beteiligte Einrichtung: Department of Civil Engineering, Wrocław University of Environmental and Life Sciences, Norwida 25, 50-375 Wrocław, Poland. Die Arbeit wurde bisher 8-mal zitiert (Crossref) und nennt 73 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Wrocław Univeristy of Environmental and Life Sciences, Wrocław University of Environmental and Life Sciences (Poland), Wrocław University of Environmental and Life Sciences and Silesian University of Technology.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Mechanical soil parameters are not constants and can be defined in various ways. Therefore, determination of their values for engineering practice is difficult. This problem is discussed based on results of piezoceramic element tests and triaxial tests (unconfined and confined) on loess specimens improved by compaction and sand admixture (20% by weight). The study indicated also the effectiveness of this simple method of loess stabilization. The influence of specimen size, draining conditions, stress and strain state, and different calculation methods on the evaluation of basic mechanical parameters were analyzed. The initial shear and Young’s moduli, the degradation of secant moduli with strain, tangent moduli, and Poisson’ ratio were determined. The results showed that the shear strength parameters are much less sensitive to the test variables than the stiffness parameters are. In triaxial tests, the strength criterion adopted, the sample size, and the drainage conditions influenced the measured value of cohesion, with a much smaller impact on the angle of internal friction. On the other hand, the adopted definition of the parameter and the range of strains had the greatest influence on the value of the stiffness modulus. Moreover, larger specimens were usually found to be stiffer.

Schlagwörter

Stichwörter der Autor:innen

loesspiezoceramic elementsshear strengthstiffnesstriaxial testunconfined compression

Autor:innen und Institutionen

  • Department of Civil Engineering, Wrocław University of Environmental and Life Sciences, Norwida 25, 50-375 Wrocław, Poland.
  • Department of Geotechnics and Roads, Silesian University of Technology, Akademicka 5, 44-100 Gliwice, Poland.

ORCID-Profile: Matylda Tankiewicz, Magdalena Kowalska

Förderung

  • Wrocław Univeristy of Environmental and Life Sciences
  • Wrocław University of Environmental and Life Sciences (Poland)
  • Wrocław University of Environmental and Life Sciences and Silesian University of Technology

Zitieren

APA

Tankiewicz, M., Kowalska, M., & Mońka, J. (2024). Evaluation of Shear Strength and Stiffness of a Loess–Sand Mixture in Triaxial and Unconfined Compression Tests. Materials, 17(15), 3831. https://doi.org/10.3390/ma17153831

Vancouver

Tankiewicz M, Kowalska M, Mońka J. Evaluation of Shear Strength and Stiffness of a Loess–Sand Mixture in Triaxial and Unconfined Compression Tests. Materials. 2024;17(15):3831. doi:10.3390/ma17153831

BibTeX
@article{Tankiewicz2024,
  author = {Tankiewicz, Matylda and Kowalska, Magdalena and Mońka, Jakub},
  title = {Evaluation of Shear Strength and Stiffness of a Loess–Sand Mixture in Triaxial and Unconfined Compression Tests},
  journal = {Materials},
  year = {2024},
  volume = {17},
  number = {15},
  pages = {3831},
  doi = {10.3390/ma17153831}
}
Kostenlos starten →