The Influence of Adding B4C and CeO2 on the Mechanical Properties of Laser Cladding Nickel-Based Coatings on the Surface of TC4 Titanium Alloy
Materials · 02.08.2024 · 17 (15) · 3823
DOI: 10.3390/ma17153823 ↗Kurz gefasst
Fachartikel in der Zeitschrift Materials, online erschienen am 02.08.2024. Verfasst von Shanna Xu und 5 weiteren Autor:innen. Beteiligte Einrichtung: Xi'an Key Laboratory of High Performance Oil and Gas Field Materials, School of Material Science and Engineering, Xi'an Shiyou University, Xi'an 7100…. Die Arbeit wurde bisher 7-mal zitiert (Crossref) und nennt 34 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Youth Innovation team construction in Shaanxi Universities, Young scientific research and innovation team of Xi'an Shiyou University, Young Scientific Research and Innovation Team of Xi’an Shiyou University.
Abstract (Originalsprache)
The development of titanium alloys is limited by issues such as low hardness, poor wear resistance, and sensitivity to adhesive wear. Using laser cladding technology to create high-hardness wear-resistant coatings on the surface of titanium alloys is an economical and efficient method that can enhance their surface hardness and wear resistance. This paper presents the preparation of two types of nickel-based composite coatings, Ni60-Ti-Cu-xB4C and Ni60-Ti-Cu-B4C-xCeO2, on the surface of TC4 titanium alloy using laser cladding. When the B4C addition was 8 wt.%, the hardness of the cladding layer was the highest, with an average microhardness of 1078 HV, which was 3.37 times that of the TC4 substrate. The friction coefficient was reduced by 24.7% compared to the TC4 substrate, and the wear volume was only 2.7% of that of the substrate material. When the CeO2 content was 3 wt.%, the hardness of the cladding layer was the highest, with an average microhardness of 1105 HV, which was 3.45 times that of the TC4 substrate. The friction coefficient was reduced by 33.7% compared to the substrate material, and the wear volume was only 1.8% of that of the substrate material.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- Xi'an Key Laboratory of High Performance Oil and Gas Field Materials, School of Material Science and Engineering, Xi'an Shiyou University, Xi'an 710065, China.
- Xi'an Rare Metal Materials Institute Co., Ltd., Xi'an 710016, China.
Förderung
- Youth Innovation team construction in Shaanxi Universities
- Young scientific research and innovation team of Xi'an Shiyou University
- Young Scientific Research and Innovation Team of Xi’an Shiyou University
Zitieren
APA
Xu, S., Han, K., Wang, H., Xi, Y., Wang, L., & Dong, X. (2024). The Influence of Adding B4C and CeO2 on the Mechanical Properties of Laser Cladding Nickel-Based Coatings on the Surface of TC4 Titanium Alloy. Materials, 17(15), 3823. https://doi.org/10.3390/ma17153823
Vancouver
Xu S, Han K, Wang H, Xi Y, Wang L, Dong X. The Influence of Adding B4C and CeO2 on the Mechanical Properties of Laser Cladding Nickel-Based Coatings on the Surface of TC4 Titanium Alloy. Materials. 2024;17(15):3823. doi:10.3390/ma17153823
BibTeX
@article{Xu2024,
author = {Xu, Shanna and Han, Keqi and Wang, Haili and Xi, Yuntao and Wang, Lei and Dong, Xikai},
title = {The Influence of Adding B4C and CeO2 on the Mechanical Properties of Laser Cladding Nickel-Based Coatings on the Surface of TC4 Titanium Alloy},
journal = {Materials},
year = {2024},
volume = {17},
number = {15},
pages = {3823},
doi = {10.3390/ma17153823}
}
EUVIMED