Mechanical Properties and Mechanism of Geopolymer Cementitious Materials Synergistically Prepared Using Red Mud and Yellow River Sand
Materials · 02.08.2024 · 17 (15) · 3810
DOI: 10.3390/ma17153810 ↗Kurz gefasst
Fachartikel in der Zeitschrift Materials, online erschienen am 02.08.2024. Verfasst von Weizhun Jin und 7 weiteren Autor:innen. Beteiligte Einrichtung: College of Civil Engineering, Henan University of Engineering, Zhengzhou 451191, China. Die Arbeit wurde bisher 12-mal zitiert (Crossref) und nennt 78 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Key Project of Henan Natural Science Foundation, Henan Province Key Research and Development Project, National Natural Science Foundation of China.
Abstract (Originalsprache)
In order to reduce the negative impact on the environment caused by the massive accumulation of red mud (RM) and Yellow River sand (YRS), new alkali-excited granulated blast-furnace slag (GGBS)/RM/YRS (AGRY) geopolymer cementitious materials were prepared by combining RM and YRS with GGBS in different ratios and using sodium silicate as the alkali exciter. The effects of YRS dosage and different curing conditions on the mechanical properties, hydration products, and pore structure of cementitious materials were investigated and analyzed in terms of cost and carbon emissions. The results showed that when the dosage of YRS was 40%, the compressive strength of the prepared AGRY cementitious material could reach 48.8 MPa at 28 d under standard curing, which showed mechanical properties comparable to those of the cementitious material without YRS. The cementitious material has a more compact internal structure, and the combination of RM and YRS promotes the chemical reaction of Al and Si elements and generates the (N, C)-A-S-H gel products, which are the key to the strength enhancement of the cementitious material. In addition, the prepared cementitious material is only 90% of the cement cost for the same strength and has low carbon emission accounting for only 43% of the cement carbon emission. This study not only provides a new way for the resource utilization of RM and YRS, but also contributes an excellent new environmentally friendly material for the construction industry to achieve the goal of low carbon development.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- College of Civil Engineering, Henan University of Engineering, Zhengzhou 451191, China.
- Henan Provincial Technical Center for Ecology and Environment, Zhengzhou 450004, China.
- School of Architecture, North China University of Water Resources and Electric Power, Zhengzhou 450046, China.
- Henan Engineering Technology Research Center of Eco-Environmental Damage Identification and Restoration, Zhengzhou 450004, China.
- College of Civil and Transportation Engineering, Hohai University, Nanjing 210024, China.
- School of Water Conservancy, North China University of Water Resources and Electric Power, Zhengzhou 450046, China.
ORCID-Profile: Yiming Chen, Xianlei Zhang
Förderung
- Key Project of Henan Natural Science Foundation
- Henan Province Key Research and Development Project
- National Natural Science Foundation of China
Zitieren
APA
Jin, W., Chen, Y., Lv, Y., Jiang, L., Bai, W., Zhang, K., Song, C., & Zhang, X. (2024). Mechanical Properties and Mechanism of Geopolymer Cementitious Materials Synergistically Prepared Using Red Mud and Yellow River Sand. Materials, 17(15), 3810. https://doi.org/10.3390/ma17153810
Vancouver
Jin W, Chen Y, Lv Y, Jiang L, Bai W, Zhang K, et al. Mechanical Properties and Mechanism of Geopolymer Cementitious Materials Synergistically Prepared Using Red Mud and Yellow River Sand. Materials. 2024;17(15):3810. doi:10.3390/ma17153810
BibTeX
@article{Jin2024,
author = {Jin, Weizhun and Chen, Yiming and Lv, Yajun and Jiang, Linhua and Bai, Weifeng and Zhang, Kangjie and Song, Caihong and Zhang, Xianlei},
title = {Mechanical Properties and Mechanism of Geopolymer Cementitious Materials Synergistically Prepared Using Red Mud and Yellow River Sand},
journal = {Materials},
year = {2024},
volume = {17},
number = {15},
pages = {3810},
doi = {10.3390/ma17153810}
}
EUVIMED