Finite Element Simulation and Microstructural Analysis of Roll Forming for DP590 High-Strength Dual-Phase Steel Wheel Rims
Materials · 01.08.2024 · 17 (15) · 3795
DOI: 10.3390/ma17153795 ↗Kurz gefasst
Fachartikel in der Zeitschrift Materials, online erschienen am 01.08.2024. Verfasst von Jingwen Song und 6 weiteren Autor:innen. Beteiligte Einrichtung: School of Materials Science and Engineering, Tianjin University of Technology, Tianjin 300384, China. Die Arbeit wurde bisher 10-mal zitiert (Crossref) und nennt 32 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).
Abstract (Originalsprache)
In this study, finite element (FE) simulation by the software Abaqus was relied on to investigate the roll forming process of a wheel rim made of an innovative dual-phase steel, i.e., DP590, after flash butt welding (FBW). In the simulation, an FE model was generated, including the design of the dies for flaring, three-roll forming, and expansion, and detailed key processing parameters based on practical production of the selected DP590. Combined with the microstructures and properties of the weld zone (WZ) and heat-affected zones (HAZs) after FBW, the distribution of stress/strain and the change in thickness of the base metal (BM), WZ and HAZs were analyzed, and compared in the important stages of roll forming. Theoretically, the variation in the microstructure and the corresponding stress–strain behaviors of the BM, WZ, and HAZs after FBW have led to the thickness reduction of DP590 that originated from softening behaviors occurring at the region of subcritical HAZs (SCHAZs), and a small amount of tempered martensite has evidently reduced the hardness and strength of the SCHAZ. Meanwhile, the distribution of stress/strain has been influenced to some extent. Further, the study includes the influence of the friction coefficient on the forming quality of the wheel rim to guarantee the simulation accuracy in practical applications. In sum, the dual-phase steel has to be carefully applied to the wheel rim, which needs to experience the processes of FBW and roll forming, focusing on the performance of SCHAZs.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- School of Materials Science and Engineering, Tianjin University of Technology, Tianjin 300384, China.
- School of Mechanical, Materials, Mechatronic and Biomedical Engineering, University of Wollongong, Wollongong, NSW 2522, Australia.
- Han-Steel, Handan 056015, China.
- Technology Research Institute, HBIS Group, Shijiazhuang 050023, China.
ORCID-Profile: Lisong Zhu
Zitieren
APA
Song, J., Lan, J., Zhu, L., Jiang, Z., Zhang, Z., Han, J., & Ma, C. (2024). Finite Element Simulation and Microstructural Analysis of Roll Forming for DP590 High-Strength Dual-Phase Steel Wheel Rims. Materials, 17(15), 3795. https://doi.org/10.3390/ma17153795
Vancouver
Song J, Lan J, Zhu L, Jiang Z, Zhang Z, Han J, et al. Finite Element Simulation and Microstructural Analysis of Roll Forming for DP590 High-Strength Dual-Phase Steel Wheel Rims. Materials. 2024;17(15):3795. doi:10.3390/ma17153795
BibTeX
@article{Song2024,
author = {Song, Jingwen and Lan, Jun and Zhu, Lisong and Jiang, Zhengyi and Zhang, Zhiqiang and Han, Jian and Ma, Cheng},
title = {Finite Element Simulation and Microstructural Analysis of Roll Forming for DP590 High-Strength Dual-Phase Steel Wheel Rims},
journal = {Materials},
year = {2024},
volume = {17},
number = {15},
pages = {3795},
doi = {10.3390/ma17153795}
}
EUVIMED