EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Fabrication of Magnetic Poly(L-lactide) (PLLA)/Fe3O4 Composite Electrospun Fibers

Zhu Liu iD, Yufu Zheng, Lizhong Lin, Xiaofei Liu, Na Qiang iD

Materials · 01.08.2024 · 17 (15) · 3773

DOI: 10.3390/ma17153773 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Materials, online erschienen am 01.08.2024. Verfasst von Zhu Liu und 4 weiteren Autor:innen. Beteiligte Einrichtung: School of Materals Science and Engineering, Tianjing University, Tianjin 300350, China. Die Arbeit wurde bisher 17-mal zitiert (Crossref) und nennt 37 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Guangdong Province key construction discipline research ability enhancement project, Youth Innovative Talents Program of Guangdong Colleges and Universities, Huizhou Science and Technology Project.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Electrospinning technology is widely used for preparing biological tissue engineering scaffolds because of its advantages of simple preparation, accurate process parameters, and easy control. Poly(L-lactide) (PLLA) is regarded as a promising biomass-based polymer for use in electrospinning. The incorporation of Fe3O4 nanoparticles (NPs) could improve the osteogenic differentiation and proliferation of cells in the presence or absence of a static magnetic field (SMF). In this work, these two materials were blended together to obtain electrospun samples with better dispersibility and improved magnetic properties. First, composite PLLA and Fe3O4 NP fibers were prepared by means of electrospinning. The influence of electrospinning conditions on the morphology of the composite fibers was then discussed. Changes in magnetic properties and thermal stability resulting from the use of different PLLA/Fe3O4 mass ratios were also considered. Next, the morphology, crystal state, thermodynamic properties, and magnetic properties of the electrospun samples were determined using scanning electron microscopy (SEM), thermogravimetric analysis (TGA), differential scanning calorimetry (DSC), X-ray diffraction (XRD), Fourier-transform infrared spectroscopy (FTIR), and vibration sample magnetization (VSM). The results showed that the fibers prepared using PLLA with Mn = 170,000 exhibited good morphology when electrospun at 12 KV. The magnetic properties of PLLA/Fe3O4 composite electrospun fibers increased with the NP content, with the exception of thermal stability. The results of the present study may help to promote the further development of PLLA/Fe3O4 composite materials in the biomedical field.

Schlagwörter

Stichwörter der Autor:innen

Fe3O4 NPsPLLAelectrospinningelectrospinning conditionsmagnetic property

Autor:innen und Institutionen

  • School of Materals Science and Engineering, Tianjing University, Tianjin 300350, China.
  • Ningbo Sidson Vibration Reduction System Co., Ltd., Ningbo 315700, China.
  • Guangdong Provincial Education Department Development Team of Advanced Material Coating and Surface Interface Technology, Huizhou Engineering Technology Research Center of Advanced Coating Materials, Dayawan Chemical En…
  • School of Dayawan Chemical and New Materials, Huizhou University, Huizhou 516007, China.
  • School of Chemistry and Materials Engineering, Huizhou University, Huizhou 516007, China.

ORCID-Profile: Zhu Liu, Na Qiang

Förderung

  • Guangdong Province key construction discipline research ability enhancement project
  • Youth Innovative Talents Program of Guangdong Colleges and Universities
  • Huizhou Science and Technology Project
  • the key projects of Guangdong Education Department
  • innovation and entrepreneurship training program project of college students

Zitieren

APA

Liu, Z., Zheng, Y., Lin, L., Liu, X., & Qiang, N. (2024). Fabrication of Magnetic Poly(L-lactide) (PLLA)/Fe3O4 Composite Electrospun Fibers. Materials, 17(15), 3773. https://doi.org/10.3390/ma17153773

Vancouver

Liu Z, Zheng Y, Lin L, Liu X, Qiang N. Fabrication of Magnetic Poly(L-lactide) (PLLA)/Fe3O4 Composite Electrospun Fibers. Materials. 2024;17(15):3773. doi:10.3390/ma17153773

BibTeX
@article{Liu2024,
  author = {Liu, Zhu and Zheng, Yufu and Lin, Lizhong and Liu, Xiaofei and Qiang, Na},
  title = {Fabrication of Magnetic Poly(L-lactide) (PLLA)/Fe3O4 Composite Electrospun Fibers},
  journal = {Materials},
  year = {2024},
  volume = {17},
  number = {15},
  pages = {3773},
  doi = {10.3390/ma17153773}
}
Kostenlos starten →