Effect of Pressure on Ce-Substituted Nd-Fe-B Hot-Deformed Magnets in the Hot-Pressing Process
Materials · 31.07.2024 · 17 (15) · 3769
DOI: 10.3390/ma17153769 ↗Kurz gefasst
Fachartikel in der Zeitschrift Materials, online erschienen am 31.07.2024. Verfasst von Ye Ryeong Jang und 3 weiteren Autor:innen. Beteiligte Einrichtung: Department of Materials Science and Engineering, Yonsei University, Seoul 03722, Republic of Korea. Die Arbeit wurde bisher 8-mal zitiert (Crossref) und nennt 39 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Research Foundation of Korea, Ministry of Trade, Industry and Energy, Ministry of Trade, Industry & Energy.
Abstract (Originalsprache)
With the increasing demand for Nd-Fe-B magnets across various applications, the cost-effective substitution of Ce has garnered significant interest. Many studies have been conducted to achieve the high magnetic properties of Nd-Ce-Fe-B hot deformation magnets in which Nd is replaced with Ce. We propose a method to improve magnetic properties of the Ce-substituted Nd-Ce-Fe-B hot-deformed magnets by optimizing the hot-pressing process. This study investigates the microstructure and properties following hot deformation of Ce-substituted Nd-Ce-Fe-B magnets fabricated at a constant temperature and different pressures (100–300 MPa) during the hot-pressing process. The results highlight the influence of pressure from previous hot-pressing processes on grain alignment and microstructure during hot deformation. Magnets subjected to hot pressing at 200 MPa followed by hot deformation achieved superior magnetic properties, with Hci = 8.9 kOe, Br = 12.2 kG, and (BH)max = 31 MGOe with 40% of Nd replaced with Ce. Conversely, precursors prepared at 100 MPa exhibited low density due to high porosity, resulting in poor microstructure and magnetic properties after hot deformation. In magnets using precursors prepared at 300 MPa, coarsened grains and a condensed h-RE2O3 phase were observed. Incorporating Ce into the magnets led to insufficient formation of RE-rich phases due to the emergence of REFe2 secondary phases, disrupting grain alignment and hindering the homogeneous distribution of the RE-rich phase essential for texture formation. Precursors prepared under suitable pressure exhibited uniform distribution of the RE-rich phase, enhancing grain alignment along the c-axis and improving magnetic properties, particularly remanence. In conclusion, our findings present a strategy for achieving the ideal microstructure and magnetic properties of hot-deformed magnets with high Ce contents.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- Department of Materials Science and Engineering, Yonsei University, Seoul 03722, Republic of Korea.
- Department of Magnetic Materials, Korea Institute of Materials Science, Changwon 51508, Republic of Korea.
ORCID-Profile: Wooyoung Lee
Förderung
- National Research Foundation of Korea
- Ministry of Trade, Industry and Energy
- Ministry of Trade, Industry & Energy
Zitieren
APA
Jang, Y. R., Kim, W., Kim, S., & Lee, W. (2024). Effect of Pressure on Ce-Substituted Nd-Fe-B Hot-Deformed Magnets in the Hot-Pressing Process. Materials, 17(15), 3769. https://doi.org/10.3390/ma17153769
Vancouver
Jang YR, Kim W, Kim S, Lee W. Effect of Pressure on Ce-Substituted Nd-Fe-B Hot-Deformed Magnets in the Hot-Pressing Process. Materials. 2024;17(15):3769. doi:10.3390/ma17153769
BibTeX
@article{Jang2024,
author = {Jang, Ye Ryeong and Kim, Wonjin and Kim, Sumin and Lee, Wooyoung},
title = {Effect of Pressure on Ce-Substituted Nd-Fe-B Hot-Deformed Magnets in the Hot-Pressing Process},
journal = {Materials},
year = {2024},
volume = {17},
number = {15},
pages = {3769},
doi = {10.3390/ma17153769}
}
EUVIMED