EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Bending Forming Characteristics of CoCrFeMnNi High-Entropy Alloy Sheets Induced by Nanosecond Pulse Laser Irradiation

Xinyu Tian, Chao Wang, Hongyang Zhang, Junfeng Gao, Hu Huang, Jiwang Yan iD

Materials · 27.07.2024 · 17 (15) · 3728

DOI: 10.3390/ma17153728 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Materials, online erschienen am 27.07.2024. Verfasst von Xinyu Tian und 5 weiteren Autor:innen. Beteiligte Einrichtung: Key Laboratory of CNC Equipment Reliability, Ministry of Education, School of Mechanical and Aerospace Engineering, Jilin University, Changchun 13002…. Die Arbeit wurde bisher 3-mal zitiert (Crossref) und nennt 52 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Natural Science Foundation of Jilin Province, National Key Research and Development Plan Project, Fundamental Research Funds for the Central Universities.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Laser bending forming, as a flexible and die-less forming approach, facilitates the three-dimensional shaping of sheets through the generation of thermal stress via laser-material interaction. In this study, the bending forming characteristics of CoCrFeMnNi high-entropy alloy sheets induced by nanosecond pulse laser irradiation were systematically investigated. The effects of parameters including laser power, scanning speed, number of scans, scanning interval, and sheet size on the bending angle, cross-sectional morphology, and hardness were studied in detail under both the laser single-line and multi-line scanning modes. The experimental results confirmed the effectiveness of nanosecond pulse laser irradiation for achieving accurate formation of CoCrFeMnNi sheets, with the successful fabrication of J, L, and U-shaped metal components. Apart from the forming ability, the cross-sectional hardness was significantly increased due to the grain refinement effect of nanosecond pulse laser irradiation. Furthermore, employing the laser single-line scanning mode enabled the effective rectification of overbending parts, showcasing complete recovery for small-angle overbending, and a remarkable 91% recovery for larger-angle overbending. This study provides an important basis for the bendability of CoCrFeMnNi sheets by laser forming and elucidates the evolution of the microstructure and mechanical properties in the bending region.

Schlagwörter

Stichwörter der Autor:innen

bendinghardnesshigh-entropy alloylaser formingtemperature gradient mechanism

Autor:innen und Institutionen

  • Key Laboratory of CNC Equipment Reliability, Ministry of Education, School of Mechanical and Aerospace Engineering, Jilin University, Changchun 130022, China.
  • Department of Mechanical Engineering, Faculty of Science and Technology, Keio University, Yokohama 223-8522, Japan.

ORCID-Profile: Jiwang Yan

Förderung

  • Natural Science Foundation of Jilin Province
  • National Key Research and Development Plan Project
  • Fundamental Research Funds for the Central Universities

Zitieren

APA

Tian, X., Wang, C., Zhang, H., Gao, J., Huang, H., & Yan, J. (2024). Bending Forming Characteristics of CoCrFeMnNi High-Entropy Alloy Sheets Induced by Nanosecond Pulse Laser Irradiation. Materials, 17(15), 3728. https://doi.org/10.3390/ma17153728

Vancouver

Tian X, Wang C, Zhang H, Gao J, Huang H, Yan J. Bending Forming Characteristics of CoCrFeMnNi High-Entropy Alloy Sheets Induced by Nanosecond Pulse Laser Irradiation. Materials. 2024;17(15):3728. doi:10.3390/ma17153728

BibTeX
@article{Tian2024,
  author = {Tian, Xinyu and Wang, Chao and Zhang, Hongyang and Gao, Junfeng and Huang, Hu and Yan, Jiwang},
  title = {Bending Forming Characteristics of CoCrFeMnNi High-Entropy Alloy Sheets Induced by Nanosecond Pulse Laser Irradiation},
  journal = {Materials},
  year = {2024},
  volume = {17},
  number = {15},
  pages = {3728},
  doi = {10.3390/ma17153728}
}
Kostenlos starten →