Experimental Study on the Effect of Polycarboxylate Superplasticizer on the Performance of Cement-Based Grouting Materials
Materials · 22.07.2024 · 17 (14) · 3620
DOI: 10.3390/ma17143620 ↗Kurz gefasst
Fachartikel in der Zeitschrift Materials, online erschienen am 22.07.2024. Verfasst von Zhijie Yu und 6 weiteren Autor:innen. Beteiligte Einrichtung: China Coal Research Institute, Beijing 100013, China. Die Arbeit wurde bisher 6-mal zitiert (Crossref) und nennt 28 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Bingtuan Financial Science and Technology Project, the National Natural Science Foundation of China, the Bingtuan Financial Science and Technology Project.
Abstract (Originalsprache)
Polycarboxylate superplasticizers BMC-L and BMC-S were utilized as modifiers in the formulation of novel cement-based grouting materials. Indoor tests were conducted on 32 groups of cement slurries, varying by water–cement ratio (0.5:1 and 0.6:1) and modifier content (0, 2‰, 4‰, 6‰, 8‰, 10‰, 12‰, and 14‰), to test their density, funnel viscosity, water separation rate, and stone rate. Four groups of slurry modified with BMC-L were selected as the preferred slurry, and the apparent viscosity test, uniaxial, and triaxial compression test of the slurry stone body were conducted. The study investigated the influence of BMC-L on various properties of the slurry, including its apparent viscosity, uniaxial compressive strength, stress–strain relationships, shear strength parameters, and elastic modulus. Ultimately, the pore structure and phase composition of the slurry stone body were detected by Nuclear Magnetic Resonance (NMR) and X-ray Diffraction (XRD), and the impact of BMC-L on slurry performance was examined from a microstructural perspective. Results indicate that the two polycarboxylate superplasticizers exert minimal influence on the density and water separation rate of the slurry. Within the effective incorporation range of the polycarboxylate superplasticizer, increasing the dosage correlates with a decrease in both the stone rate and viscosity of the slurry. BMC-L significantly enhances the mechanical properties of the slurry stone body by promoting more complete cement hydration and reducing porosity. The uniaxial compressive strength of slurry stone body with a 6 ‰ BMC-L dosage reached 29.7 MPa after 7 days and 38.5 MPa after 28 days of curing, representing increases of 118.4% and 64%, respectively, compared to masonry with 0 BMC-L dosage. The shear strength parameters and elastic modulus of the slurry stone body also showed corresponding increases.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- China Coal Research Institute, Beijing 100013, China.
- National Engineering Research Center of Deep Shaft Construction, Beijing 100013, China.
- Beijing China Coal Mine Engineering Company Ltd., Beijing 100013, China.
- School of Civil and Resource Engineering, University of Science and Technology Beijing, Beijing 100085, China.
- China Coal Technology Engineering Group, Beijing 100013, China.
ORCID-Profile: Jinze Sun
Förderung
- Bingtuan Financial Science and Technology Project
- the National Natural Science Foundation of China
- the Bingtuan Financial Science and Technology Project
Zitieren
APA
Yu, Z., Liu, S., Zhang, J., He, W., Tian, Q., Tian, L., & Sun, J. (2024). Experimental Study on the Effect of Polycarboxylate Superplasticizer on the Performance of Cement-Based Grouting Materials. Materials, 17(14), 3620. https://doi.org/10.3390/ma17143620
Vancouver
Yu Z, Liu S, Zhang J, He W, Tian Q, Tian L, et al. Experimental Study on the Effect of Polycarboxylate Superplasticizer on the Performance of Cement-Based Grouting Materials. Materials. 2024;17(14):3620. doi:10.3390/ma17143620
BibTeX
@article{Yu2024,
author = {Yu, Zhijie and Liu, Shujie and Zhang, Jiwei and He, Wen and Tian, Qinghao and Tian, Le and Sun, Jinze},
title = {Experimental Study on the Effect of Polycarboxylate Superplasticizer on the Performance of Cement-Based Grouting Materials},
journal = {Materials},
year = {2024},
volume = {17},
number = {14},
pages = {3620},
doi = {10.3390/ma17143620}
}
EUVIMED