A Study on the Application Performance of High-Aspect-Ratio Nano-Ettringite in Photocurable Resin Composites
Materials · 14.07.2024 · 17 (14) · 3492
DOI: 10.3390/ma17143492 ↗Kurz gefasst
Fachartikel in der Zeitschrift Materials, online erschienen am 14.07.2024. Verfasst von Weihua Cao und 1 weiteren Autor:innen. Beteiligte Einrichtung: School of Materials Science and Engineering, Nanjing Tech University, Nanjing 211816, China. Die Arbeit wurde bisher 2-mal zitiert (Crossref) und nennt 43 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Priority Academic Program Development (PAPD) of Jiangsu Higher Education Institutions.
Abstract (Originalsprache)
In this study, the impact of the addition of high-aspect-ratio nano-ettringite to photocurable epoxy acrylate resin was explored. The nano-ettringite samples were modified using γ-Aminopropyltriethoxysilane (KH-550) and γ-methacryloxypropyl trimethoxy silane (KH-570). Then, 3 wt% or 6 wt% KH-550-modified, KH-570-modified, and unmodified nano-ettringite samples were dispersed into resin via ultrasonic treatment in conjunction with mechanical stirring. The grafting effects of nano-ettringite onto KH-550 or KH-570 were analyzed through scanning electron microscopy (SEM), Fourier transform infrared (FTIR) spectroscopy, X-ray diffraction (XRD), and thermogravimetric (TG) analysis. The results demonstrate that KH-550 and KH-570 have been successfully grafted onto the surface of nano-ettringite. In addition, this study also focuses on the variations of composite materials in the viscosity, shrinkage, tensile strength, and elongation at break. The results indicate that increased dosages of unmodified, KH-550-modified, and KH-570-modified nano-ettringite led to increased viscosity of the composite while reducing shrinkage. At the same dosage, the photocurable resin containing KH-570-modified nano-ettringite demonstrated a lower shrinkage and a higher tensile strength. From the analysis of tensile fracture surfaces, it was observed that compared to the KH-550 modified and unmodified variants, the KH-570 modified nano-ettringite exhibits superior dispersibility in photocurable epoxy acrylate resin. Notably, when the amount of KH-570-modified nano-ettringite was 3 wt%, the highest tensile strength of the composite was 64.61 MPa, representing a 72.57% increase compared to the blank sample. Furthermore, the incorporation of KH-570-modified nano-ettringite as a filler provides a new perspective for improving the performance of photocurable epoxy acrylate resin composites.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- School of Materials Science and Engineering, Nanjing Tech University, Nanjing 211816, China.
Förderung
- Priority Academic Program Development (PAPD) of Jiangsu Higher Education Institutions
Zitieren
APA
Cao, W., & Zhu, H. (2024). A Study on the Application Performance of High-Aspect-Ratio Nano-Ettringite in Photocurable Resin Composites. Materials, 17(14), 3492. https://doi.org/10.3390/ma17143492
Vancouver
Cao W, Zhu H. A Study on the Application Performance of High-Aspect-Ratio Nano-Ettringite in Photocurable Resin Composites. Materials. 2024;17(14):3492. doi:10.3390/ma17143492
BibTeX
@article{Cao2024,
author = {Cao, Weihua and Zhu, Hong},
title = {A Study on the Application Performance of High-Aspect-Ratio Nano-Ettringite in Photocurable Resin Composites},
journal = {Materials},
year = {2024},
volume = {17},
number = {14},
pages = {3492},
doi = {10.3390/ma17143492}
}
EUVIMED