The Main Failure Modes of Hot-Work Die Steel and the Development Status of Traditional Strengthening Methods and Nano-Strengthening Technology
Materials · 12.07.2024 · 17 (14) · 3455
DOI: 10.3390/ma17143455 ↗Kurz gefasst
Übersichtsarbeit in der Zeitschrift Materials, online erschienen am 12.07.2024. Verfasst von Hong-Yu Cui und 14 weiteren Autor:innen. Beteiligte Einrichtung: Key Laboratory of Automobile Materials, Ministry of Education and Department of Materials Science and Engineering, Jilin University, Renmin Street No…. Die Arbeit wurde bisher 17-mal zitiert (Crossref) und nennt 119 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Development Program of Jilin Province, China, undergraduate Innovation Fund of Jilin University, China.
Abstract (Originalsprache)
As an important part of die steels, hot-work die steels are mainly used to manufacture molds made of solid metal or high-temperature liquid metal from heating to recrystallization temperature. In view of the requirements for mechanical properties and service life for hot-work die steel, it is conducive to improve the thermal fatigue resistance, wear resistance, and oxidation resistance of hot work die steel. In this review, the main failure modes of hot-work die steel were analyzed. Four traditional methods of strengthening and toughening die steel were summarized, including optimizing alloying elements, electroslag remelting, increasing the forging ratio, and heat treatment process enhancement. A new nano-strengthening method was introduced that aimed to refine the microstructure of hot-work abrasive steel and improve its service performance by adding nanoparticles into molten steel to achieve uniform dispersion. This review provides an overview to improve the service performance and service life of hot work die steel.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- Key Laboratory of Automobile Materials, Ministry of Education and Department of Materials Science and Engineering, Jilin University, Renmin Street No. 5988, Changchun 130025, China.
- Zhanghang Shangda Superalloys Materials Co., Ltd., No. 16 Wangong Avenue, Qinghe County, Xingtai 054800, China.
- FAW Foundry Co., Ltd., Changchun 130013, China.
- School of Mechanical and Aerospace Engineering, Jilin University, Renmin Street No. 5988, Changchun 130025, China.
- Jilin Liyuan Precision Manufacturing Co., Ltd., No. 5729, Xi'ning Road, Economic Development Zone, Liaoyuan 136299, China.
- Zhenjiang Xianfeng Automotive Parts Co., Ltd., Dantu High Tech Industrial Park, Zhenjiang 212000, China.
ORCID-Profile: Hong-Yu Cui, Feng Qiu
Förderung
- Development Program of Jilin Province, China
- undergraduate Innovation Fund of Jilin University, China
Zitieren
APA
Cui, H. Y., Bao, Z. J., Gong, Q., Bao, S. Z., Zou, Y. Z., Li, A. M., Yang, H. Y., Wang, C. G., Li, Z. G., Chang, F., Shu, S. L., Kang, J., Zhu, M., Qiu, F., & Jiang, Q. C. (2024). The Main Failure Modes of Hot-Work Die Steel and the Development Status of Traditional Strengthening Methods and Nano-Strengthening Technology. Materials, 17(14), 3455. https://doi.org/10.3390/ma17143455
Vancouver
Cui HY, Bao ZJ, Gong Q, Bao SZ, Zou YZ, Li AM, et al. The Main Failure Modes of Hot-Work Die Steel and the Development Status of Traditional Strengthening Methods and Nano-Strengthening Technology. Materials. 2024;17(14):3455. doi:10.3390/ma17143455
BibTeX
@article{Cui2024,
author = {Cui, Hong-Yu and Bao, Ze-Ju and Gong, Qin and Bao, Shi-Zhe and Zou, Yun-Zhi and Li, Ai-Min and Yang, Hong-Yu and Wang, Cheng-Gang and Li, Zhi-Gang and Chang, Fang and Shu, Shi-Li and Kang, Jie and Zhu, Ming and Qiu, Feng and Jiang, Qi-Chuan},
title = {The Main Failure Modes of Hot-Work Die Steel and the Development Status of Traditional Strengthening Methods and Nano-Strengthening Technology},
journal = {Materials},
year = {2024},
volume = {17},
number = {14},
pages = {3455},
doi = {10.3390/ma17143455}
}
EUVIMED