Inclusion Removal Process of Homogeneous CuCr50 Alloy In-Situ Synthesized by Al-Mg Composite Strengthening Reduction Coupling Slagging
Materials · 12.07.2024 · 17 (14) · 3452
DOI: 10.3390/ma17143452 ↗Kurz gefasst
Fachartikel in der Zeitschrift Materials, online erschienen am 12.07.2024. Verfasst von Wang An und 3 weiteren Autor:innen. Beteiligte Einrichtung: Metallurgy School, Northeastern University, Shenyang 110819, China. Die Arbeit wurde bisher 5-mal zitiert (Crossref) und nennt 38 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Natural Science Foundation of China, Fundamental Research Funds for Central Universities.
Abstract (Originalsprache)
To overcome the problem of Cr2O3 and Al2O3 inclusions in CuCr50 alloy prepared by aluminothermic reduction method, in this paper, a novel methodology for strengthening metal–slag separation through in situ slagging is proposed. CuCr50 alloys were prepared by metallothermic reduction using Al and Al-Mg as reducing agents, and the physical properties of the slag, such as viscosity, density, and surface tension, were adjusted by controlling the proportion of CaO in the slagging agent in the raw material to achieve good separation of the slag–metal. The results show that with the ratio of CaO increased, CaO and MgO were coupled to make slag, which combined with Cr2O3 and Al2O3 to form CaCr2O4, MgCr2O4, and CaAl4O7 in the slag, thus reducing the content of impurities in the alloy. When RCaO/(CaO + Al2O3 + MgO) = 20%, the Cr content ranged from 46.61% to 47.09%, the inclusions accounted for 1.60%, the Cr particle size was refined to 20 µm, the number of Cr spherical crystals accounted for 9.88%, the conductivity reached 14.96 MS/m, and the hardness reached 100.23 HB. After heat treatment, the Cr phase was refined in the alloy, the conductivity increased from 14.96 MS/m to 18.27 MS/m, and the hardness increased from 100.23 HB to 103.1 HB. This method is expected to provide an effective method for the preparation of CuCr50 contact materials.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- Metallurgy School, Northeastern University, Shenyang 110819, China.
- Key Laboratory of Ecological Metallurgy of Multi-Metal Intergrown Ores of Ministry of Education, Shenyang 110819, China.
ORCID-Profile: Tingan Zhang
Förderung
- National Natural Science Foundation of China
- Fundamental Research Funds for Central Universities
Zitieren
APA
An, W., Dou, Z., Zhang, T., & Han, J. (2024). Inclusion Removal Process of Homogeneous CuCr50 Alloy In-Situ Synthesized by Al-Mg Composite Strengthening Reduction Coupling Slagging. Materials, 17(14), 3452. https://doi.org/10.3390/ma17143452
Vancouver
An W, Dou Z, Zhang T, Han J. Inclusion Removal Process of Homogeneous CuCr50 Alloy In-Situ Synthesized by Al-Mg Composite Strengthening Reduction Coupling Slagging. Materials. 2024;17(14):3452. doi:10.3390/ma17143452
BibTeX
@article{An2024,
author = {An, Wang and Dou, Zhihe and Zhang, Tingan and Han, Jinru},
title = {Inclusion Removal Process of Homogeneous CuCr50 Alloy In-Situ Synthesized by Al-Mg Composite Strengthening Reduction Coupling Slagging},
journal = {Materials},
year = {2024},
volume = {17},
number = {14},
pages = {3452},
doi = {10.3390/ma17143452}
}
EUVIMED