EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

The Influence of Three-Dimensionally Printed Polymer Materials as Trusses and Shell Structures on the Mechanical Properties and Load-Bearing Capacity of Reinforced Concrete

Mohammad Hematibahar iD, Ali Hasanzadeh iD, Makhmud Kharun iD, Alexey N Beskopylny iD, Sergey A Stel'makh iD, Evgenii M Shcherban' iD

Materials · 10.07.2024 · 17 (14) · 3413

DOI: 10.3390/ma17143413 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Materials, online erschienen am 10.07.2024. Verfasst von Mohammad Hematibahar und 5 weiteren Autor:innen. Beteiligte Einrichtung: Department of Reinforced Concrete and Stone Structures, Moscow State University of Civil Engineering, 26 Yaroslavskoye Highway, 129337 Moscow, Russia. Die Arbeit wurde bisher 25-mal zitiert (Crossref) und nennt 76 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Three-dimensional printing technology (3D printing) is becoming a more and more popular technology for aerospace, biology, medicine, mechanics, civil and other engineering fields. In civil engineering, researchers and engineers attempt to print construction materials such as concrete using 3D-printing technology. This study aims to investigate the reinforcement of concrete beams with 3D printing. To achieve this, fused deposition modeling (FDM) technology as a printing method and polylactic acid (PLA) as a material were selected. Two types of geometries were chosen to find the optimal mechanical behavior of concrete: high-performance concrete (HPC) reinforced with four types of trusses (Pratt, Howe, Warren, and Warren with vertical) and ultra-high-performance concrete (UHPC) reinforced with a hyperboloid shell structure. The compressive and tensile strengths of reinforced UHPC were examined by a three-point bending test, and reinforced HPC was examined by a four-point bending test. The results of the experiments show that hyperboloid shell structures can absorb energy, although the strength of reinforced UHPC is reduced. For example, there was a decrease of over 20% in the compressive strength and 41% in the flexural strength, but the ductility was raised. Adding the hyperboloid shell structure improved the deformability of the UHPC. When Warren and Howe trusses were added to the HPC as reinforcements, the flexural strength improved by over 26% and 4.3%, respectively. The overall results of this study show that the concrete reinforced with 3D-printed trusses was better than that with a hyperboloid shell structure.

Schlagwörter

Stichwörter der Autor:innen

3D printinghigh-performance concretehyperboloidpolymer reinforcementpolymersshell structureultra-high-performance concrete

Autor:innen und Institutionen

  • Department of Reinforced Concrete and Stone Structures, Moscow State University of Civil Engineering, 26 Yaroslavskoye Highway, 129337 Moscow, Russia.
  • Department of Geotechnical Engineering, Babol Noshirvani University of Technology, P.O. Box 484, Babol 4714871167, Iran.
  • Department of Transport Systems, Faculty of Roads and Transport Systems, Don State Technical University, 344003 Rostov-on-Don, Russia.
  • Department of Unique Buildings and Constructions Engineering, Don State Technical University, 344003 Rostov-on-Don, Russia.
  • Department of Engineering Geometry and Computer Graphics, Don State Technical University, 344003 Rostov-on-Don, Russia.

ORCID-Profile: Mohammad Hematibahar, Ali Hasanzadeh, Makhmud Kharun, Alexey N Beskopylny, Sergey A Stel'makh, Evgenii M Shcherban'

Zitieren

APA

Hematibahar, M., Hasanzadeh, A., Kharun, M., Beskopylny, A. N., Stel'makh, S. A., & Shcherban', E. M. (2024). The Influence of Three-Dimensionally Printed Polymer Materials as Trusses and Shell Structures on the Mechanical Properties and Load-Bearing Capacity of Reinforced Concrete. Materials, 17(14), 3413. https://doi.org/10.3390/ma17143413

Vancouver

Hematibahar M, Hasanzadeh A, Kharun M, Beskopylny AN, Stel'makh SA, Shcherban' EM. The Influence of Three-Dimensionally Printed Polymer Materials as Trusses and Shell Structures on the Mechanical Properties and Load-Bearing Capacity of Reinforced Concrete. Materials. 2024;17(14):3413. doi:10.3390/ma17143413

BibTeX
@article{Hematibahar2024,
  author = {Hematibahar, Mohammad and Hasanzadeh, Ali and Kharun, Makhmud and Beskopylny, Alexey N and Stel'makh, Sergey A and Shcherban', Evgenii M},
  title = {The Influence of Three-Dimensionally Printed Polymer Materials as Trusses and Shell Structures on the Mechanical Properties and Load-Bearing Capacity of Reinforced Concrete},
  journal = {Materials},
  year = {2024},
  volume = {17},
  number = {14},
  pages = {3413},
  doi = {10.3390/ma17143413}
}
Kostenlos starten →