EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Mechanical Properties of Silicon Carbide Composites Reinforced with Reduced Graphene Oxide

Kamil Broniszewski, Jarosław Woźniak iD, Tomasz Cygan iD, Dorota Moszczyńska, Andrzej Olszyna iD

Materials · 08.07.2024 · 17 (13) · 3370

DOI: 10.3390/ma17133370 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Materials, online erschienen am 08.07.2024. Verfasst von Kamil Broniszewski und 4 weiteren Autor:innen. Beteiligte Einrichtung: Faculty of Materials Science and Engineering, Warsaw University of Technology, ul. Wołoska 141, 02-507 Warsaw, Poland. Die Arbeit wurde bisher 10-mal zitiert (Crossref) und nennt 37 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Ministry of Science and the Higher Education Republic of Poland.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

This article presents research on the influence of reduced graphene oxide on the mechanical properties of silicon carbide matrix composites sintered with the use of the Spark Plasma Sintering method. The produced sinters were subjected to a three-point bending test. An increase in flexural strength was observed, which reaches a maximum value of 503.8 MPa for SiC–2 wt.% rGO composite in comparison to 323 MPa for the reference SiC sample. The hardness of composites decreases with the increase in rGO content down to 1475 HV10, which is correlated with density results. Measured fracture toughness values are burdened with a high standard deviation due to the presence of rGO agglomerates. The KIC reaches values in the range of 3.22–3.82 MPa*m1/2. Three main mechanisms responsible for the increase in the fracture toughness of composites were identified: bridging, deflecting, and branching of cracks. Obtained results show that reduced graphene oxide can be used as a reinforcing phase to the SiC matrix, with an especially visible impact on flexural strength.

Schlagwörter

Stichwörter der Autor:innen

compositesmechanical propertiessilicon carbide

Autor:innen und Institutionen

  • Faculty of Materials Science and Engineering, Warsaw University of Technology, ul. Wołoska 141, 02-507 Warsaw, Poland.

ORCID-Profile: Jarosław Woźniak, Tomasz Cygan, Andrzej Olszyna

Förderung

  • Ministry of Science and the Higher Education Republic of Poland

Zitieren

APA

Broniszewski, K., Woźniak, J., Cygan, T., Moszczyńska, D., & Olszyna, A. (2024). Mechanical Properties of Silicon Carbide Composites Reinforced with Reduced Graphene Oxide. Materials, 17(13), 3370. https://doi.org/10.3390/ma17133370

Vancouver

Broniszewski K, Woźniak J, Cygan T, Moszczyńska D, Olszyna A. Mechanical Properties of Silicon Carbide Composites Reinforced with Reduced Graphene Oxide. Materials. 2024;17(13):3370. doi:10.3390/ma17133370

BibTeX
@article{Broniszewski2024,
  author = {Broniszewski, Kamil and Woźniak, Jarosław and Cygan, Tomasz and Moszczyńska, Dorota and Olszyna, Andrzej},
  title = {Mechanical Properties of Silicon Carbide Composites Reinforced with Reduced Graphene Oxide},
  journal = {Materials},
  year = {2024},
  volume = {17},
  number = {13},
  pages = {3370},
  doi = {10.3390/ma17133370}
}
Kostenlos starten →