Performance and Morphology of Waterborne Polyurethane Asphalt in the Vicinity of Phase Inversion
Materials · 08.07.2024 · 17 (13) · 3368
DOI: 10.3390/ma17133368 ↗Kurz gefasst
Fachartikel in der Zeitschrift Materials, online erschienen am 08.07.2024. Verfasst von Chengwei Wu und 7 weiteren Autor:innen. Beteiligte Einrichtung: MOE Key Laboratory of High Performance Polymer Materials and Technology, School of Chemistry and Chemical Engineering, Nanjing University, Nanjing 21…. Die Arbeit wurde bisher 11-mal zitiert (Crossref) und nennt 55 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).
Abstract (Originalsprache)
Waterborne polyurethane asphalt emulsion (WPUA) is an environmentally friendly bituminous material, whose performance is highly dependent on the phase structure of the continuous phase. In this paper, WPUAs in the vicinity of phase inversion were prepared using waterborne polyurethane (WPU) and asphalt emulsion. The chemical structures, thermal stability, dynamic mechanical properties, phase-separated morphology and mechanical performance of WPUAs were studied. Fourier-transform infrared (FTIR) spectra revealed that there are no –NCO bonds in either the pure WPU or WPUAs. Moreover, the preparation of WPUA is a physical process. The addition of WPU weakens the thermal stability of asphalt emulsion. WPU improves the storage modulus of asphalt emulsion at lower and higher temperatures. The glass transition temperatures of the WPUA films are higher than that of the pure WPU film. When the WPU concentration increases from 30 wt% to 40 wt%, phase inversion occurs; that is, the continuous phase shifts from asphalt to WPU. The WPUA films have lower tensile strength and toughness than the pure WPU film. However, the elongations at break of the WPUA films are higher than that of the pure WPU film. Both the tensile strength and toughness of the WPUA films increase with the WPU concentration. Due to the occurrence of phase inversion, the elongation at break, tensile strength and toughness of the WPUA film containing 30 wt% WPU are increased by 29%, 250% and 369%, respectively, compared to the film with 40 wt% WPU.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- MOE Key Laboratory of High Performance Polymer Materials and Technology, School of Chemistry and Chemical Engineering, Nanjing University, Nanjing 210023, China.
- Sobute New Materials Co., Ltd., Nanjing 211103, China.
- Experimental Chemistry Teaching Center, School of Chemistry and Chemical Engineering, Nanjing University, Nanjing 210023, China.
- Public Instrument Center, School of Chemistry and Chemical Engineering, Nanjing University, Nanjing 210023, China.
ORCID-Profile: Hongfeng Xie
Zitieren
APA
Wu, C., Yang, H., Cui, X., Chen, Y., Xi, Z., Cai, J., Zhang, J., & Xie, H. (2024). Performance and Morphology of Waterborne Polyurethane Asphalt in the Vicinity of Phase Inversion. Materials, 17(13), 3368. https://doi.org/10.3390/ma17133368
Vancouver
Wu C, Yang H, Cui X, Chen Y, Xi Z, Cai J, et al. Performance and Morphology of Waterborne Polyurethane Asphalt in the Vicinity of Phase Inversion. Materials. 2024;17(13):3368. doi:10.3390/ma17133368
BibTeX
@article{Wu2024,
author = {Wu, Chengwei and Yang, Haocheng and Cui, Xinpeng and Chen, Yachun and Xi, Zhonghua and Cai, Jun and Zhang, Junsheng and Xie, Hongfeng},
title = {Performance and Morphology of Waterborne Polyurethane Asphalt in the Vicinity of Phase Inversion},
journal = {Materials},
year = {2024},
volume = {17},
number = {13},
pages = {3368},
doi = {10.3390/ma17133368}
}
EUVIMED