EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Structure and Selected Properties of SnO2 Thin Films

Aneta Kania iD, Magdalena M Szindler, Marek Szindler, Zbigniew Brytan iD, Wojciech Łoński iD

Materials · 06.07.2024 · 17 (13) · 3348

DOI: 10.3390/ma17133348 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Materials, online erschienen am 06.07.2024. Verfasst von Aneta Kania und 4 weiteren Autor:innen. Beteiligte Einrichtung: Department of Engineering Materials and Biomaterials, Faculty of Mechanical Engineering, Silesian University of Technology, Konarskiego 18a, 44-100 G…. Die Arbeit wurde bisher 16-mal zitiert (Crossref) und nennt 30 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Magnesium and its alloys are attractive temporary implants due to their biocompatibility and biodegradability. Moreover, Mg has good mechanical and osteoinductive properties. But magnesium and Mg alloys have one significant disadvantage: poor corrosion resistance in a physiological environment. Hence, a deposition of various layers on the surface of Mg alloys seems to be a good idea. The purpose of the article is to analyze the structure and morphology of two MgCa2Zn1 and MgCa2Zn1Gd3 alloys coated by SnO2 ALD (atomic layer deposition) films of various thickness. The studies were performed using scanning electron microscopy (SEM), X-ray fluorescence (XRF), and an X-ray diffractometer. The corrosion activity of the thin films and substrate alloys in a chloride-rich Ringer’s solution at 37 °C was also observed. The corrosion tests that include electrochemical, immersion measurements, and electrochemical impedance spectroscopy (EIS) were evaluated. The results indicated that SnO2 had a heterogeneous crystal structure. The surfaces of the thin films were rough with visible pores. The corrosion resistance of SnO2 measured in all corrosion tests was higher for the thicker films. The observations of corrosion products after immersion tests indicated that they were lamellar-shaped and mainly contained Mg, O, Ca, and Cl in a lower concentration.

Schlagwörter

Stichwörter der Autor:innen

ALD methodSnO2 thin filmscorrosion resistancecorrosion studiesstructure analysis

Autor:innen und Institutionen

  • Department of Engineering Materials and Biomaterials, Faculty of Mechanical Engineering, Silesian University of Technology, Konarskiego 18a, 44-100 Gliwice, Poland.
  • Scientific and Didactic Laboratory of Nanotechnology and Material Technologies, Faculty of Mechanical Engineering, Silesian University of Technology, Towarowa 7, 44-100 Gliwice, Poland.

ORCID-Profile: Aneta Kania, Zbigniew Brytan, Wojciech Łoński

Zitieren

APA

Kania, A., Szindler, M. M., Szindler, M., Brytan, Z., & Łoński, W. (2024). Structure and Selected Properties of SnO2 Thin Films. Materials, 17(13), 3348. https://doi.org/10.3390/ma17133348

Vancouver

Kania A, Szindler MM, Szindler M, Brytan Z, Łoński W. Structure and Selected Properties of SnO2 Thin Films. Materials. 2024;17(13):3348. doi:10.3390/ma17133348

BibTeX
@article{Kania2024,
  author = {Kania, Aneta and Szindler, Magdalena M and Szindler, Marek and Brytan, Zbigniew and Łoński, Wojciech},
  title = {Structure and Selected Properties of SnO2 Thin Films},
  journal = {Materials},
  year = {2024},
  volume = {17},
  number = {13},
  pages = {3348},
  doi = {10.3390/ma17133348}
}
Kostenlos starten →