EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Modeling Interface Damage with Random Interface Strength on Asphalt Concrete Impervious Facings

Hui Peng, Nanxuan Qian, Desheng Yin, Wei Luo

Materials · 04.07.2024 · 17 (13) · 3310

DOI: 10.3390/ma17133310 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Materials, online erschienen am 04.07.2024. Verfasst von Hui Peng und 3 weiteren Autor:innen. Beteiligte Einrichtung: Hubei Key Laboratory of Hydropower Engineering Construction and Management, China Three Gorges University, Yichang 443002, China. Die Arbeit wurde bisher 4-mal zitiert (Crossref) und nennt 51 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Hui Peng, National Key Research and Development Program of China, Educational Commission of Hubei Province of China.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Asphalt concrete impervious facings, widely adopted as the impervious structures for rockfill dams and upper reservoirs in pumped storage power stations, typically have a multilayer structure with a thin sealing layer, a thick impervious layer, and a thick leveling bonding layer. The properties of the interfaces between these layers are crucial for the overall performance of the facings. This paper develops a model to investigate the complex interface damage behavior of the facing under static water pressure and gravity. The model considers two damage origins: one is the interface adhesion–decohesion damage, which is described by the cohesive zone model (CZM) combined with the Weibull-type random interface strength distribution, and the other is the bulk damage of each layer, described by Mazars’ model. Primarily, a comparison between numerical simulation and indoor direct shear tests validates the reliability of the CZM for the asphalt concrete layer interface. Then, the damage distribution of the two interfaces is simulated, and the characteristics of the interface stress are analyzed in detail. The interface shear stresses of the ogee sections, which have different curvatures, all show an interesting oscillation between the thin sealing layer and the impervious layer, and the interface damage at this interface exhibits high heterogeneity. Furthermore, tension stress exists in the local zones of the ogee section, and the damage in this section is significantly greater than in other parts of the facings.

Schlagwörter

Stichwörter der Autor:innen

Mazars damageadhesion–decohesion damagecohesive zone modelimpervious facings

Autor:innen und Institutionen

  • Hubei Key Laboratory of Hydropower Engineering Construction and Management, China Three Gorges University, Yichang 443002, China.
  • College of Hydraulic & Environmental Engineering, China Three Gorges University, Yichang 443002, China.

Förderung

  • Hui Peng
  • National Key Research and Development Program of China
  • Educational Commission of Hubei Province of China

Zitieren

APA

Peng, H., Qian, N., Yin, D., & Luo, W. (2024). Modeling Interface Damage with Random Interface Strength on Asphalt Concrete Impervious Facings. Materials, 17(13), 3310. https://doi.org/10.3390/ma17133310

Vancouver

Peng H, Qian N, Yin D, Luo W. Modeling Interface Damage with Random Interface Strength on Asphalt Concrete Impervious Facings. Materials. 2024;17(13):3310. doi:10.3390/ma17133310

BibTeX
@article{Peng2024,
  author = {Peng, Hui and Qian, Nanxuan and Yin, Desheng and Luo, Wei},
  title = {Modeling Interface Damage with Random Interface Strength on Asphalt Concrete Impervious Facings},
  journal = {Materials},
  year = {2024},
  volume = {17},
  number = {13},
  pages = {3310},
  doi = {10.3390/ma17133310}
}
Kostenlos starten →