Chemical Stability of High-Entropy Spinel in a High-Pressure Pure Hydrogen Atmosphere
Materials · 04.07.2024 · 17 (13) · 3309
DOI: 10.3390/ma17133309 ↗Kurz gefasst
Fachartikel in der Zeitschrift Materials, online erschienen am 04.07.2024. Verfasst von Kamil Domaradzki und 5 weiteren Autor:innen. Beteiligte Einrichtung: Faculty of Materials Science and Ceramics, AGH University of Krakow, al. Mickiewicza 30, 30-059 Krakow, Poland. Die Arbeit wurde bisher 4-mal zitiert (Crossref) und nennt 38 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: the Ministry of Education and Science for the AGH University of Krakow.
Abstract (Originalsprache)
This paper focuses on high-entropy spinels, which represent a rapidly growing group of materials with physicochemical properties that make them suitable for hydrogen energy applications. The influence of high-pressure pure hydrogen on the chemical stability of three high-entropy oxide (HEO) sinter samples with a spinel structure was investigated. Multicomponent HEO samples were obtained via mechanochemical synthesis (MS) combined with high-temperature thermal treatment. Performing the free sintering procedure on powders after MS at 1000 °C for 3 h in air enabled achieving single-phase (Cr0.2Fe0.2Mg0.2Mn0.2Ni0.2)3O4 and (Cu0.2Fe0.2Mg0.2Ni0.2Ti0.2)3O4 powders with a spinel structure, and in the case of (Cu0.2Fe0.2Mg0.2Ti0.2Zn0.2)3O4, a spinel phase in the amount of 95 wt.% was achieved. A decrease in spinel phase crystallite size and an increase in lattice strains were established in the synthesized spinel powders. The hydrogenation of the synthesized samples in a high-pressure hydrogen atmosphere was investigated using Sievert’s technique. The results of XRD, SEM, and EDS investigations clearly showed that pure hydrogen at temperatures of up to 250 °C and a pressure of up to 40 bar did not significantly impact the structure and microstructure of the (Cr0.2Fe0.2Mg0.2Mn0.2Ni0.2)3O4 ceramic, which demonstrates its potential for application in hydrogen technologies.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- Faculty of Materials Science and Ceramics, AGH University of Krakow, al. Mickiewicza 30, 30-059 Krakow, Poland.
- Institute of Materials Science and Engineering, Faculty of Materials Engineering and Technical Physics, Poznan University of Technology, Jana Pawla II 24, 61-138 Poznań, Poland.
- Institute of Material and Biomedical Engineering, Faculty of Mechanical Engineering, University of Zielona Góra, 65-417 Zielona Góra, Poland.
ORCID-Profile: Anna Adamczyk, Michał Pyzalski, Tomasz Brylewski, Marek Nowak, Mieczysław Jurczyk
Förderung
- the Ministry of Education and Science for the AGH University of Krakow
Zitieren
APA
Domaradzki, K., Adamczyk, A., Pyzalski, M., Brylewski, T., Nowak, M., & Jurczyk, M. (2024). Chemical Stability of High-Entropy Spinel in a High-Pressure Pure Hydrogen Atmosphere. Materials, 17(13), 3309. https://doi.org/10.3390/ma17133309
Vancouver
Domaradzki K, Adamczyk A, Pyzalski M, Brylewski T, Nowak M, Jurczyk M. Chemical Stability of High-Entropy Spinel in a High-Pressure Pure Hydrogen Atmosphere. Materials. 2024;17(13):3309. doi:10.3390/ma17133309
BibTeX
@article{Domaradzki2024,
author = {Domaradzki, Kamil and Adamczyk, Anna and Pyzalski, Michał and Brylewski, Tomasz and Nowak, Marek and Jurczyk, Mieczysław},
title = {Chemical Stability of High-Entropy Spinel in a High-Pressure Pure Hydrogen Atmosphere},
journal = {Materials},
year = {2024},
volume = {17},
number = {13},
pages = {3309},
doi = {10.3390/ma17133309}
}
EUVIMED