Proposal for New Method for Calculating Sedimentation Process Efficiency in Water Treatment Plants
Materials · 03.07.2024 · 17 (13) · 3285
DOI: 10.3390/ma17133285 ↗Kurz gefasst
Fachartikel in der Zeitschrift Materials, online erschienen am 03.07.2024. Verfasst von Marian Banaś und 1 weiteren Autor:innen. Beteiligte Einrichtung: Department of Power Systems and Environmental Protection Facilities, Faculty of Mechanical Engineering and Robotics, AGH University of Science and Te…. Die Arbeit wurde bisher 5-mal zitiert (Crossref) und nennt 34 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: The publishing fee was financed by the AGH research project no. 16.16.130.942 supported by the Polish Ministry of Education and Science., Polish Ministry of Education and Science.
Abstract (Originalsprache)
An important aspect of water treatment is removing fine-grain materials from water. Due to the properties of fine-grain materials, they are difficult to remove from water. During the sedimentation process, which takes place in settling tanks, such materials are removed. The sedimentation process is often accompanied by coagulation and flocculation processes, which form aggregates of particles (flocs) from the fine-grained material particles in a suspension (non-grainy suspension). This kind of suspension (consisting of aggregates of particles or flocs) shows a different behaviour when falling compared with classic grainy suspensions. The main goal and novelty of this article are to propose (and test) a modification of the often used Stokes’ formula with the addition of fractal geometry into the calculation of the terminal velocity of free-falling particles in order to overcome Stokes’ formula’s limitation, thus obtaining the sedimentation process efficiency. Because of this fractal modification, it is possible to use the simple and elegant Stokes’ formula in order to calculate better the terminal velocity of non-grainy particles—aggregates or flocs—and thus obtain the sedimentation efficiency for the whole range of suspensions, both non-grainy and grainy. The results obtained in this article show that the sedimentation process efficiency calculated by using the modified formula based on the fractal geometry morphology of particles (the proposed fractal method) describes and agrees more with the data from the experiment than the sedimentation efficiency calculated only based on particle size (classic method).
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- Department of Power Systems and Environmental Protection Facilities, Faculty of Mechanical Engineering and Robotics, AGH University of Science and Technology, Mickiewicza 30, 30-059 Krakow, Poland.
ORCID-Profile: Marian Banaś, Bartłomiej Hilger
Förderung
- The publishing fee was financed by the AGH research project no. 16.16.130.942 supported by the Polish Ministry of Education and Science.
- Polish Ministry of Education and Science
Zitieren
APA
Banaś, M., & Hilger, B. (2024). Proposal for New Method for Calculating Sedimentation Process Efficiency in Water Treatment Plants. Materials, 17(13), 3285. https://doi.org/10.3390/ma17133285
Vancouver
Banaś M, Hilger B. Proposal for New Method for Calculating Sedimentation Process Efficiency in Water Treatment Plants. Materials. 2024;17(13):3285. doi:10.3390/ma17133285
BibTeX
@article{Bana2024,
author = {Banaś, Marian and Hilger, Bartłomiej},
title = {Proposal for New Method for Calculating Sedimentation Process Efficiency in Water Treatment Plants},
journal = {Materials},
year = {2024},
volume = {17},
number = {13},
pages = {3285},
doi = {10.3390/ma17133285}
}
EUVIMED