EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Conductometric H2S Sensors Based on TiO2 Nanoparticles

Yassine Alaya, Malek Madani, Noureddine Bouguila iD, Lassaad El Mir iD, Enza Fazio, Carmelo Corsaro iD, Giovanni Neri iD

Materials · 03.07.2024 · 17 (13) · 3283

DOI: 10.3390/ma17133283 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Materials, online erschienen am 03.07.2024. Verfasst von Yassine Alaya und 6 weiteren Autor:innen. Beteiligte Einrichtung: Laboratory of Physics of Materials and Nanomaterials Applied at Environment (LaPhyMNE), Faculty of Sciences in Gabes, Gabes University, Gabes 6072, T…. Die Arbeit wurde bisher 14-mal zitiert (Crossref) und nennt 51 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: European Union (NextGeneration EU).

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

High-performance hydrogen sulfide (H2S) sensors are mandatory for many industrial applications. However, the development of H2S sensors still remains a challenge for researchers. In this work, we report the study of a TiO2-based conductometric sensor for H2S monitoring at low concentrations. TiO2 samples were first synthesized using the sol-gel route, annealed at different temperatures (400 and 600 °C), and thoroughly characterized to evaluate their morphological and microstructural properties. Scanning electronic microscopy, Raman scattering, X-ray diffraction, and FTIR spectroscopy have demonstrated the formation of clusters of pure anatase in the TiO2 phase. Increasing the calcination temperature to 600 °C enhanced TiO2 crystallinity and particle size (from 11 nm to 51 nm), accompanied by the transition to the rutile phase and a slight decrease in band gap (3.31 eV for 400 °C to 3.26 eV for 600 °C). Sensing tests demonstrate that TiO2 annealed at 400 °C displays good performances (sensor response Ra/Rg of ~3.3 at 2.5 ppm and fast response/recovery of 8 and 23 s, respectively) for the detection of H2S at low concentrations in air.

Schlagwörter

Stichwörter der Autor:innen

H2S sensorTiO2 nanopowdersol-gelthermal treatment

Autor:innen und Institutionen

  • Laboratory of Physics of Materials and Nanomaterials Applied at Environment (LaPhyMNE), Faculty of Sciences in Gabes, Gabes University, Gabes 6072, Tunisia.
  • Department of Mathematical and Computer Sciences, Physical Sciences and Earth Sciences, University of Messina, Viale F. Stagno D'Alcontres 31, 98166 Messina, Italy.
  • Department of Engineering, University of Messina, C.da Di Dio, 98166 Messina, Italy.

ORCID-Profile: Noureddine Bouguila, Lassaad El Mir, Carmelo Corsaro, Giovanni Neri

Förderung

  • European Union (NextGeneration EU)

Zitieren

APA

Alaya, Y., Madani, M., Bouguila, N., El Mir, L., Fazio, E., Corsaro, C., & Neri, G. (2024). Conductometric H2S Sensors Based on TiO2 Nanoparticles. Materials, 17(13), 3283. https://doi.org/10.3390/ma17133283

Vancouver

Alaya Y, Madani M, Bouguila N, El Mir L, Fazio E, Corsaro C, et al. Conductometric H2S Sensors Based on TiO2 Nanoparticles. Materials. 2024;17(13):3283. doi:10.3390/ma17133283

BibTeX
@article{Alaya2024,
  author = {Alaya, Yassine and Madani, Malek and Bouguila, Noureddine and El Mir, Lassaad and Fazio, Enza and Corsaro, Carmelo and Neri, Giovanni},
  title = {Conductometric H2S Sensors Based on TiO2 Nanoparticles},
  journal = {Materials},
  year = {2024},
  volume = {17},
  number = {13},
  pages = {3283},
  doi = {10.3390/ma17133283}
}
Kostenlos starten →