EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Microcrack and Porosity Development in Sealed Cement Mortars Measured with Micro-Computed Tomography

Radek Ševčík iD, Irena Adámková iD, Michal Vopálenský iD, Pavel Martauz, Vít Šmilauer iD

Materials · 02.07.2024 · 17 (13) · 3239

DOI: 10.3390/ma17133239 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Materials, online erschienen am 02.07.2024. Verfasst von Radek Ševčík und 4 weiteren Autor:innen. Beteiligte Einrichtung: Institute of Theoretical and Applied Mechanics of the Czech Academy of Sciences, Centre Telč, Prosecká 809/76, 190 00 Prague, Czech Republic. Die Arbeit wurde bisher 15-mal zitiert (Crossref) und nennt 44 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Czech Science Foundation, Czech Academy of Sciences, Institute of Theoretical and Applied Mechanics.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

For the first time, this paper explores the role of hydration kinetics on microcrack development in cement mortars using the μ-CT technique with a resolution of 2.2 µm. Three binders were tested: fine-grained ordinary Portland cement (OPC) with Blaine fineness of 391 m2/kg, coarse-grained OPC made from the same clinker with Blaine fineness of 273 m2/kg, and H-cement as a representative of the alkali-activated binder. It was found that most microcracks have a width in the range of 5–10 µm, increasing their occurrence with the progress of sealed hydration. While H-cement and coarse-grained OPC showed a comparable number of microcracks, fine-grained OPC exhibited more than twice the number of microcracks. In this sense, high hydration kinetics induce more microcracks, promoting later coalescence into visible cracks and disintegration of concrete at the end. Therefore, durable concrete with minimum microcracks should be derived from slow hydration kinetics or alkali-activation processes.

Schlagwörter

Stichwörter der Autor:innen

OPCalkali-activated cementmicro-computed tomographymicrocrackssealed hydration

Autor:innen und Institutionen

  • Institute of Theoretical and Applied Mechanics of the Czech Academy of Sciences, Centre Telč, Prosecká 809/76, 190 00 Prague, Czech Republic.
  • Cement Plant Považská Cementáreň, a.s., 018 63 Ladce, Slovakia.
  • Department of Mechanics, Faculty of Civil Engineering, Czech Technical University in Prague, Thákurova 7, 166 29 Prague, Czech Republic.

ORCID-Profile: Radek Ševčík, Irena Adámková, Michal Vopálenský, Vít Šmilauer

Förderung

  • Czech Science Foundation
  • Czech Academy of Sciences, Institute of Theoretical and Applied Mechanics

Zitieren

APA

Ševčík, R., Adámková, I., Vopálenský, M., Martauz, P., & Šmilauer, V. (2024). Microcrack and Porosity Development in Sealed Cement Mortars Measured with Micro-Computed Tomography. Materials, 17(13), 3239. https://doi.org/10.3390/ma17133239

Vancouver

Ševčík R, Adámková I, Vopálenský M, Martauz P, Šmilauer V. Microcrack and Porosity Development in Sealed Cement Mortars Measured with Micro-Computed Tomography. Materials. 2024;17(13):3239. doi:10.3390/ma17133239

BibTeX
@article{evk2024,
  author = {Ševčík, Radek and Adámková, Irena and Vopálenský, Michal and Martauz, Pavel and Šmilauer, Vít},
  title = {Microcrack and Porosity Development in Sealed Cement Mortars Measured with Micro-Computed Tomography},
  journal = {Materials},
  year = {2024},
  volume = {17},
  number = {13},
  pages = {3239},
  doi = {10.3390/ma17133239}
}
Kostenlos starten →