Properties of Fiber-Reinforced Geopolymer Mortar Using Coal Gangue and Aeolian Sand
Materials · 01.07.2024 · 17 (13) · 3225
DOI: 10.3390/ma17133225 ↗Kurz gefasst
Fachartikel in der Zeitschrift Materials, online erschienen am 01.07.2024. Verfasst von Yupeng Li und 5 weiteren Autor:innen. Beteiligte Einrichtung: College of Water Conservancy & Architectural Engineering, Shihezi University, Shihezi 832003, China. Die Arbeit wurde bisher 11-mal zitiert (Crossref) und nennt 25 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Natural Science Foundation of China, The Program of Young and Middle-Aged Science and Technology Innovation Leading Talents of Xinjiang Production and Construction Corps.
Abstract (Originalsprache)
Geopolymers, as a novel cementitious material, exhibit typical brittle failure characteristics under stress. To mitigate this brittleness, fibers can be incorporated to enhance toughness. This study investigates the effects of varying polypropylene fiber (PPF) content and fiber length on the flowability, mechanical properties, and flexural toughness of coal gangue-based geopolymers. Microstructural changes and porosity variations within the Fiber-Reinforced Geopolymer Mortar(GMPF) matrix were observed using scanning electron microscope (SEM) and Low field NMR(LF-NMR) to elucidate the toughening mechanism of PPF-reinforced geopolymers. The introduction of fibers into the geopolymer matrix demonstrated an initial bridging effect in the viscous geopolymer slurry, with a 3.0 vol% fiber content reducing fluidity by 5.6%. Early mechanical properties of GMPF were enhanced with fiber addition; at 1.5 vol% fiber content and 15 mm length, the 3-day flexural and compressive strengths increased by 30.81% and 17.4%, respectively. Furthermore, polypropylene fibers significantly improved the matrix’s flexural toughness, which showed an increasing trend with higher fiber content. At a 3.0 vol% fiber content, the flexural toughness index increased by 198.35%. The data indicated that a fiber length of 12 mm yielded the best toughening effect, with an 84.03% increase in the flexural toughness index. SEM observations revealed a strong interfacial bond between fibers and the matrix, with noticeable damage on the fiber surface due to frictional forces, and fiber pull-out being the predominant failure mode. Porosity testing results indicated that fiber incorporation substantially improved the internal pore structure of the matrix, reducing the median pore diameter of mesopores and converting mesopores to micropores. Additionally, the number of harmless and less harmful pores increased by 23.01%, while the number of more harmful pores decreased by 30.43%.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- College of Water Conservancy & Architectural Engineering, Shihezi University, Shihezi 832003, China.
- Xinjiang Kusha Highway Development Limited Liability Company, Aksu 843000, China.
Förderung
- National Natural Science Foundation of China
- The Program of Young and Middle-Aged Science and Technology Innovation Leading Talents of Xinjiang Production and Construction Corps
Zitieren
APA
Li, Y., Maimait, A., Cheng, J., Duan, Y., Chen, Y., & Dong, H. (2024). Properties of Fiber-Reinforced Geopolymer Mortar Using Coal Gangue and Aeolian Sand. Materials, 17(13), 3225. https://doi.org/10.3390/ma17133225
Vancouver
Li Y, Maimait A, Cheng J, Duan Y, Chen Y, Dong H. Properties of Fiber-Reinforced Geopolymer Mortar Using Coal Gangue and Aeolian Sand. Materials. 2024;17(13):3225. doi:10.3390/ma17133225
BibTeX
@article{Li2024,
author = {Li, Yupeng and Maimait, Akelamjiang and Cheng, Jianjun and Duan, Yanfu and Chen, Yuanqing and Dong, Hongguang},
title = {Properties of Fiber-Reinforced Geopolymer Mortar Using Coal Gangue and Aeolian Sand},
journal = {Materials},
year = {2024},
volume = {17},
number = {13},
pages = {3225},
doi = {10.3390/ma17133225}
}
EUVIMED