Fatigue Strength Assessment of Friction Welds under Consideration of Residual Stress
Materials · 26.06.2024 · 17 (13) · 3130
DOI: 10.3390/ma17133130 ↗Kurz gefasst
Fachartikel in der Zeitschrift Materials, online erschienen am 26.06.2024. Verfasst von Lorenz Uhlenberg und 6 weiteren Autor:innen. Beteiligte Einrichtung: Institute of Joining and Welding, Technische Universität Braunschweig, Langer Kamp 8, 38106 Braunschweig, Germany. Die Arbeit wurde bisher 12-mal zitiert (Crossref) und nennt 38 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Federal Ministry for Economic Affairs and Climate Action, Federal Ministry for Economic Affairs and Energy.
Abstract (Originalsprache)
A reliable local-fatigue assessment approach for rotary friction-welded components does not yet exist. The scope of this paper is to present test results for the fatigue behaviour of rotary friction-welded solid shafts made of structural steel S355J2G3 (1.0570) and an approach to fatigue assessment considering residual stress. In contrast to fusion-welded joints, components made by rotary friction welding usually contain compressive residual stress near the weld, which can significantly affect the fatigue strength. For this purpose, specimens were welded and characterised, including metallographic micrographs, hardness measurements, and residual stress measurements. The fatigue tests were performed with a constant amplitude loading in tension/compression or torsion with R = −1. All specimens were investigated without machining of the weld flash, either in the as-welded state or after a post-weld stress-relief heat treatment. In addition, the friction welding process and the residual stress formation were analysed using numerical simulation. The characterisation results are integrated into a fatigue assessment approach. Overall, the specimens perform comparatively well in the fatigue tests and the experimentally observed fatigue behaviour is well described using the proposed local approaches.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- Institute of Joining and Welding, Technische Universität Braunschweig, Langer Kamp 8, 38106 Braunschweig, Germany.
- Fraunhofer Institute for Structural Durability and System Reliability LBF, Bartningstr. 47, 64289 Darmstadt, Germany.
- Sampro GmbH, Dillweg 17b, 39110 Magdeburg, Germany.
- Institute of Mechanical Engineering, Hochschule Magdeburg-Stendal, Breitscheidstraße 2, 39114 Magdeburg, Germany.
ORCID-Profile: Lorenz Uhlenberg, Jörg Baumgartner, Frank Trommer, Klaus Dilger
Förderung
- Federal Ministry for Economic Affairs and Climate Action
- Federal Ministry for Economic Affairs and Energy
Zitieren
APA
Uhlenberg, L., Baumgartner, J., Rößler, C., Schmicker, D., Köhler, M., Trommer, F., & Dilger, K. (2024). Fatigue Strength Assessment of Friction Welds under Consideration of Residual Stress. Materials, 17(13), 3130. https://doi.org/10.3390/ma17133130
Vancouver
Uhlenberg L, Baumgartner J, Rößler C, Schmicker D, Köhler M, Trommer F, et al. Fatigue Strength Assessment of Friction Welds under Consideration of Residual Stress. Materials. 2024;17(13):3130. doi:10.3390/ma17133130
BibTeX
@article{Uhlenberg2024,
author = {Uhlenberg, Lorenz and Baumgartner, Jörg and Rößler, Christoph and Schmicker, David and Köhler, Markus and Trommer, Frank and Dilger, Klaus},
title = {Fatigue Strength Assessment of Friction Welds under Consideration of Residual Stress},
journal = {Materials},
year = {2024},
volume = {17},
number = {13},
pages = {3130},
doi = {10.3390/ma17133130}
}
EUVIMED