EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Analysis of Energy and Material Consumption for the Manufacturing of an Aeronautical Tooling: An Experimental Comparison between Pure Machining and Big Area Additive Manufacturing

Alejandro Marqués iD, Jose Antonio Dieste iD, Iván Monzón iD, Alberto Laguía, Carlos Javierre iD, Daniel Elduque

Materials · 21.06.2024 · 17 (13) · 3066

DOI: 10.3390/ma17133066 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Materials, online erschienen am 21.06.2024. Verfasst von Alejandro Marqués und 5 weiteren Autor:innen. Beteiligte Einrichtung: R&D Department, Fundación Aitiip, Polígono Industrial Empresarium, C/Romero, No. 12, 50720 Zaragoza, Spain. Die Arbeit wurde bisher 7-mal zitiert (Crossref) und nennt 90 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: European Health and Digital executive agency (HADEA), Gobierno de Aragón.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Additive manufacturing (AM) has been fully incorporated into both the academic and the industrial world. This technology has been shown to lower costs and environmental impacts. Moreover, AM-based technologies, such as wire arc additive manufacturing (WAAM), have been proven suitable for the manufacturing of large products with significant mechanical requirements. This study examines the manufacture of two aeronautical toolings: first, using conventional techniques, and second, using a big area additive manufacturing (BAAM) process, specifically WAAM technology, followed by second-stage hybrid machining. Both toolings can be considered interchangeable in terms of design and performance. Energy and material consumption were analysed and compared throughout both tooling procedures. The results show the important optimisation of both procedures in manufacturing WAAM tooling, encompassing the additive process and second-stage hybrid machining. Nevertheless, the time required for WAAM tooling manufacturing increased significantly compared to conventional manufacturing tooling. Moreover, based on metrology data from the AM process, a theoretical study was conducted to assess different design optimisations for WAAM tooling manufacturing and determine their influence on material and energy consumption. These theoretical results improve those already obtained regarding energy and raw material savings.

Schlagwörter

Stichwörter der Autor:innen

additive manufacturingaeronautical toolingbig area additive manufacturingenergy consumptionmaterial consumptionwire arc additive manufacturing

Autor:innen und Institutionen

  • R&D Department, Fundación Aitiip, Polígono Industrial Empresarium, C/Romero, No. 12, 50720 Zaragoza, Spain.
  • Department of Mechanical Engineering, University of Zaragoza, C/María de Luna, 50720 Zaragoza, Spain.

ORCID-Profile: Alejandro Marqués, Jose Antonio Dieste, Iván Monzón, Carlos Javierre

Förderung

  • European Health and Digital executive agency (HADEA)
  • Gobierno de Aragón

Zitieren

APA

Marqués, A., Dieste, J. A., Monzón, I., Laguía, A., Javierre, C., & Elduque, D. (2024). Analysis of Energy and Material Consumption for the Manufacturing of an Aeronautical Tooling: An Experimental Comparison between Pure Machining and Big Area Additive Manufacturing. Materials, 17(13), 3066. https://doi.org/10.3390/ma17133066

Vancouver

Marqués A, Dieste JA, Monzón I, Laguía A, Javierre C, Elduque D. Analysis of Energy and Material Consumption for the Manufacturing of an Aeronautical Tooling: An Experimental Comparison between Pure Machining and Big Area Additive Manufacturing. Materials. 2024;17(13):3066. doi:10.3390/ma17133066

BibTeX
@article{Marqus2024,
  author = {Marqués, Alejandro and Dieste, Jose Antonio and Monzón, Iván and Laguía, Alberto and Javierre, Carlos and Elduque, Daniel},
  title = {Analysis of Energy and Material Consumption for the Manufacturing of an Aeronautical Tooling: An Experimental Comparison between Pure Machining and Big Area Additive Manufacturing},
  journal = {Materials},
  year = {2024},
  volume = {17},
  number = {13},
  pages = {3066},
  doi = {10.3390/ma17133066}
}
Kostenlos starten →