EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Experimental Study of Auxetic Structures Made of Re-Entrant (“Bow-Tie”) Cells

Julian Plewa iD, Małgorzata Płońska iD, Kamil Feliksik, Grzegorz Junak

Materials · 21.06.2024 · 17 (13) · 3061

DOI: 10.3390/ma17133061 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Materials, online erschienen am 21.06.2024. Verfasst von Julian Plewa und 3 weiteren Autor:innen. Beteiligte Einrichtung: Faculty of Science and Technology, Institute of Materials Engineering, University of Silesia in Katowice, 75 Pułku Piechoty Str., 41-500 Chorzów, Pol…. Die Arbeit wurde bisher 12-mal zitiert (Crossref) und nennt 56 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Polish Ministry of Education and Science.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

This article presents a study of metamaterial structures that exhibit auxetic properties. This unusual phenomenon of simultaneous orthogonal expansion of the metamaterial in tension, and vice versa in compression, with vertical and horizontal contraction, is explored for structures made of re-entrant unit cells. The geometry of such structures is analysed in detail, and the relationships are determined by the value of the Poisson’s ratio. It is shown that the Poisson’s ratio depends not only on the geometry of the unit cell but also on the degree of strain. Depending on the dimensions of the structure’s horizontal and inclined struts, the limit values are determined for the angle between them. By creating physical structures made of re-entrant cells, it is demonstrated that the mechanism of change in the structure’s dimensions is not due to the hinging but to the bending of the struts. The experimental section contains the results of compression tests of a symmetrical structure and tensile tests of a flat mesh structure. In the case of the mesh structure, a modification of the re-entrant cells was used to create arched strut joints. This modification makes it possible to obtain greater elongation of the mesh structure and larger NPR values.

Schlagwörter

Stichwörter der Autor:innen

Poisson’s ratioarch strutsauxeticre-entrant unit cell

Autor:innen und Institutionen

  • Faculty of Science and Technology, Institute of Materials Engineering, University of Silesia in Katowice, 75 Pułku Piechoty Str., 41-500 Chorzów, Poland.
  • Faculty of Materials Engineering, Silesian University of Technology, 8 Krasińskiego Str., 40-019 Katowice, Poland.

ORCID-Profile: Julian Plewa, Małgorzata Płońska

Förderung

  • Polish Ministry of Education and Science

Zitieren

APA

Plewa, J., Płońska, M., Feliksik, K., & Junak, G. (2024). Experimental Study of Auxetic Structures Made of Re-Entrant (“Bow-Tie”) Cells. Materials, 17(13), 3061. https://doi.org/10.3390/ma17133061

Vancouver

Plewa J, Płońska M, Feliksik K, Junak G. Experimental Study of Auxetic Structures Made of Re-Entrant (“Bow-Tie”) Cells. Materials. 2024;17(13):3061. doi:10.3390/ma17133061

BibTeX
@article{Plewa2024,
  author = {Plewa, Julian and Płońska, Małgorzata and Feliksik, Kamil and Junak, Grzegorz},
  title = {Experimental Study of Auxetic Structures Made of Re-Entrant (“Bow-Tie”) Cells},
  journal = {Materials},
  year = {2024},
  volume = {17},
  number = {13},
  pages = {3061},
  doi = {10.3390/ma17133061}
}
Kostenlos starten →