EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Ultrathin Titanium Dioxide Coating Enables High-Rate and Long-Life Lithium Cobalt Oxide

Liu Gao, Xin Jin, Zijin Li, Fujie Li, Binghui Xu iD, Chao Wang iD

Materials · 20.06.2024 · 17 (12) · 3036

DOI: 10.3390/ma17123036 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Materials, online erschienen am 20.06.2024. Verfasst von Liu Gao und 5 weiteren Autor:innen. Beteiligte Einrichtung: Institute of Materials for Energy and Environment, College of Materials Science and Engineering, Qingdao University, Qingdao 266071, China. Die Arbeit wurde bisher 5-mal zitiert (Crossref) und nennt 36 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Natural Science Foundation of Shandong Province.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Lithium cobalt oxide (LCO) has been widely used as a leading cathode material for lithium-ion batteries in consumer electronics. However, unstable cathode electrolyte interphase (CEI) and undesired phase transitions during fast Li+ diffusivity always incur an inferior stability of the high-voltage LCO (HV-LCO). Here, an ultra-thin amorphous titanium dioxide (TiO2) coating layer engineered on LCO by an atomic layer deposition (ALD) strategy is demonstrated to improve the high-rate and long-cycling properties of the HV-LCO cathode. Benefitting from the uniform TiO2 protective layer, the Li+ storage properties of the modified LCO obtained after 50 ALD cycles (LCO-ALD50) are significantly improved. The results show that the average Li+ diffusion coefficient is nearly tripled with a high-rate capability of 125 mAh g−1 at 5C. An improved cycling stability with a high-capacity retention (86.7%) after 300 cycles at 1C is also achieved, far outperforming the bare LCO (37.9%). The in situ XRD and ex situ XPS results demonstrate that the dense and stable CEI induced by the surface TiO2 coating layer buffers heterogenous lithium flux insertion during cycling and prevents electrolyte, which contributes to the excellent cycling stability of LCO-ALD50. This work reveals the mechanism of surface protection by transition metal oxides coating and facilitates the development of long-life HV-LCO electrodes.

Schlagwörter

Stichwörter der Autor:innen

atomic layer depositionlithium cobalt oxidelithium-ion batteriessurface coatingtitanium dioxide

Autor:innen und Institutionen

  • Institute of Materials for Energy and Environment, College of Materials Science and Engineering, Qingdao University, Qingdao 266071, China.

ORCID-Profile: Binghui Xu, Chao Wang

Förderung

  • Natural Science Foundation of Shandong Province

Zitieren

APA

Gao, L., Jin, X., Li, Z., Li, F., Xu, B., & Wang, C. (2024). Ultrathin Titanium Dioxide Coating Enables High-Rate and Long-Life Lithium Cobalt Oxide. Materials, 17(12), 3036. https://doi.org/10.3390/ma17123036

Vancouver

Gao L, Jin X, Li Z, Li F, Xu B, Wang C. Ultrathin Titanium Dioxide Coating Enables High-Rate and Long-Life Lithium Cobalt Oxide. Materials. 2024;17(12):3036. doi:10.3390/ma17123036

BibTeX
@article{Gao2024,
  author = {Gao, Liu and Jin, Xin and Li, Zijin and Li, Fujie and Xu, Binghui and Wang, Chao},
  title = {Ultrathin Titanium Dioxide Coating Enables High-Rate and Long-Life Lithium Cobalt Oxide},
  journal = {Materials},
  year = {2024},
  volume = {17},
  number = {12},
  pages = {3036},
  doi = {10.3390/ma17123036}
}
Kostenlos starten →