EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Steel Slag Accelerated Carbonation Curing for High-Carbonation Precast Concrete Development

Weilong Li, Hui Wang, Zhichao Liu, Ning Li, Shaowei Zhao, Shuguang Hu

Materials · 17.06.2024 · 17 (12) · 2968

DOI: 10.3390/ma17122968 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Materials, online erschienen am 17.06.2024. Verfasst von Weilong Li und 5 weiteren Autor:innen. Beteiligte Einrichtung: State Key Laboratory of Silicate Materials for Architectures, Wuhan University of Technology, Wuhan 430070, China. Die Arbeit wurde bisher 14-mal zitiert (Crossref) und nennt 41 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Zhichao Liu, National Natural Science Foundation of China, Key Research Project of BBMG.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Steel slag as an alkaline industrial solid waste, possesses the inherent capacity to engage in carbonation reactions with carbon dioxide (CO2). Capitalizing on this property, the current research undertakes a systematic investigation into the fabrication of high-carbonation precast concrete (HCPC). This is achieved by substituting a portion of the cementitious materials with steel slag during the carbonation curing process. The study examines the influence of varying water–binder ratios, silica fume dosages, steel slag dosages, and sand content on the compressive strength of HCPC. Findings indicate that adjusting the water–binder ratio to 0.18, adding 8% silica fume, and a sand volume ratio of 40% can significantly enhance the compressive strength of HCPC, which can reach up to 104.9 MPa. Additionally, the robust frost resistance of HCPC is substantiated by appearance damage analysis, mass loss rate, and compressive strength loss rate, after 50 freeze–thaw cycles the mass loss, and the compressive strength loss rate can meet the specification requirements. The study also corroborates the high-temperature stability of HCPC. This study optimized the preparation of HCPC and provided a feasibility for its application in precast concrete.

Schlagwörter

Stichwörter der Autor:innen

carbonationdurabilityfreeze–thaw cyclehigh-temperature resistancesteel slag

Autor:innen und Institutionen

  • State Key Laboratory of Silicate Materials for Architectures, Wuhan University of Technology, Wuhan 430070, China.
  • State Key Laboratory of Solid Waste Reuse for Building Materials, Beijing Building Materials Academy of Science Research, Beijing 100041, China.

Förderung

  • Zhichao Liu
  • National Natural Science Foundation of China
  • Key Research Project of BBMG

Zitieren

APA

Li, W., Wang, H., Liu, Z., Li, N., Zhao, S., & Hu, S. (2024). Steel Slag Accelerated Carbonation Curing for High-Carbonation Precast Concrete Development. Materials, 17(12), 2968. https://doi.org/10.3390/ma17122968

Vancouver

Li W, Wang H, Liu Z, Li N, Zhao S, Hu S. Steel Slag Accelerated Carbonation Curing for High-Carbonation Precast Concrete Development. Materials. 2024;17(12):2968. doi:10.3390/ma17122968

BibTeX
@article{Li2024,
  author = {Li, Weilong and Wang, Hui and Liu, Zhichao and Li, Ning and Zhao, Shaowei and Hu, Shuguang},
  title = {Steel Slag Accelerated Carbonation Curing for High-Carbonation Precast Concrete Development},
  journal = {Materials},
  year = {2024},
  volume = {17},
  number = {12},
  pages = {2968},
  doi = {10.3390/ma17122968}
}
Kostenlos starten →