EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Influence of Si Addition on the Microstructures, Phase Assemblages and Properties in CoCrNi Medium-Entropy Alloy

Hui Chang, Shengfang Wang, Zhouzhu Mao, Tuanwei Zhang, Zhiqiang Li, Zhihua Wang

Materials · 13.06.2024 · 17 (12) · 2893

DOI: 10.3390/ma17122893 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Materials, online erschienen am 13.06.2024. Verfasst von Hui Chang und 5 weiteren Autor:innen. Beteiligte Einrichtung: Institute of Applied Mechanics, College of Mechanical and Vehicle Engineering, Taiyuan University of Technology, Taiyuan 030024, China. Die Arbeit wurde bisher 9-mal zitiert (Crossref) und nennt 32 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Natural Science Foundation of China, Science and Technology Innovation Teams of Shanxi Province.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The effects of Si addition on the microstructures and properties of CoCrNi medium-entropy alloy (MEA) were systematically investigated. The CrCoNiSix MEA possesses a single face-centered cubic (FCC) phase when x is less than 0.3 and promotes solution strengthening, while the crystal structure shows a transition to the FCC+σ phase structure when x = 0.4 and the volume fraction of the σ phase increases with a microstructure evolution as the Si content increases. The Orowan mechanism from σ precipitation effectively enhances the strength, hardness, and stain hardening of CrCoNiSix MEA, which also exhibits superior hardness at high temperatures. Furthermore, a large amount of σ phase decreases the wear resistance because of the transformation of the main wear mechanism from abrasion wear for σ-free CrCoNiSix MEA to adhesion wear for σ-contained CrCoNiSix MEA. This work contributes to the understanding of the effect of Si addition on FCC structured alloys and provides guidance for the development of novel Si-doped alloys.

Schlagwörter

Stichwörter der Autor:innen

hardnessmechanical propertiesmedium-entropy alloysmicrostructureswear resistance

Autor:innen und Institutionen

  • Institute of Applied Mechanics, College of Mechanical and Vehicle Engineering, Taiyuan University of Technology, Taiyuan 030024, China.
  • Shanxi Key Laboratory of Material Strength and Structural Impact, Taiyuan University of Technology, Taiyuan 030024, China.
  • College of Aeronautics and Astronautics, Taiyuan University of Technology, Taiyuan 030024, China.

Förderung

  • National Natural Science Foundation of China
  • Science and Technology Innovation Teams of Shanxi Province

Zitieren

APA

Chang, H., Wang, S., Mao, Z., Zhang, T., Li, Z., & Wang, Z. (2024). Influence of Si Addition on the Microstructures, Phase Assemblages and Properties in CoCrNi Medium-Entropy Alloy. Materials, 17(12), 2893. https://doi.org/10.3390/ma17122893

Vancouver

Chang H, Wang S, Mao Z, Zhang T, Li Z, Wang Z. Influence of Si Addition on the Microstructures, Phase Assemblages and Properties in CoCrNi Medium-Entropy Alloy. Materials. 2024;17(12):2893. doi:10.3390/ma17122893

BibTeX
@article{Chang2024,
  author = {Chang, Hui and Wang, Shengfang and Mao, Zhouzhu and Zhang, Tuanwei and Li, Zhiqiang and Wang, Zhihua},
  title = {Influence of Si Addition on the Microstructures, Phase Assemblages and Properties in CoCrNi Medium-Entropy Alloy},
  journal = {Materials},
  year = {2024},
  volume = {17},
  number = {12},
  pages = {2893},
  doi = {10.3390/ma17122893}
}
Kostenlos starten →