Analysis of the Steelmaking Process via Data Mining and Pearson Correlation
Materials · 06.06.2024 · 17 (11) · 2786
DOI: 10.3390/ma17112786 ↗Kurz gefasst
Fachartikel in der Zeitschrift Materials, online erschienen am 06.06.2024. Verfasst von Susana Carrasco-López und 4 weiteren Autor:innen. Beteiligte Einrichtung: Centro de Investigación y de Estudios Avanzados, CINVESTAV Saltillo, Av. Industria Metalúrgica No. 1062, Parque Industrial Saltillo-Ramos Arizpe, Ram…. Die Arbeit wurde bisher 12-mal zitiert (Crossref) und nennt 17 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).
Abstract (Originalsprache)
The continuous improvement of the steelmaking process is a critical issue for steelmakers. In the production of Ca-treated Al-killed steel, the Ca and S contents are controlled for successful inclusion modification treatment. In this study, a machine learning technique was used to build a decision tree classifier and thus identify the process variables that most influence the desired Ca and S contents at the end of ladle furnace refining. The attribute of the root node of the decision tree was correlated with process variables via the Pearson formalism. Thus, the attribute of the root node corresponded to the sulfur distribution coefficient at the end of the refining process, and its value allowed for the discrimination of satisfactory heats from unsatisfactory heats. The variables with higher correlation with the sulfur distribution coefficient were the content of sulfur in both steel and slag at the end of the refining process, as well as the Si content at that stage of the process. As secondary variables, the Si content and the basicity of the slag at the end of the refining process were correlated with the S content in the steel and slag, respectively, at that stage. The analysis showed that the conditions of steel and slag at the beginning of the refining process and the efficient S removal during the refining process are crucial for reaching desired Ca and S contents.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- Centro de Investigación y de Estudios Avanzados, CINVESTAV Saltillo, Av. Industria Metalúrgica No. 1062, Parque Industrial Saltillo-Ramos Arizpe, Ramos Arizpe 25900, Coahuila, Mexico.
- Ternium México, San Nicolás de los Garza 66450, Nuevo León, Mexico.
ORCID-Profile: Manuel Castro-Román, Edgar Iván Castro-Cedeño
Zitieren
APA
Carrasco-López, S., Herrera-Trejo, M., Castro-Román, M., Castro-Uresti, F., & Castro-Cedeño, E. I. (2024). Analysis of the Steelmaking Process via Data Mining and Pearson Correlation. Materials, 17(11), 2786. https://doi.org/10.3390/ma17112786
Vancouver
Carrasco-López S, Herrera-Trejo M, Castro-Román M, Castro-Uresti F, Castro-Cedeño EI. Analysis of the Steelmaking Process via Data Mining and Pearson Correlation. Materials. 2024;17(11):2786. doi:10.3390/ma17112786
BibTeX
@article{CarrascoLpez2024,
author = {Carrasco-López, Susana and Herrera-Trejo, Martín and Castro-Román, Manuel and Castro-Uresti, Fabián and Castro-Cedeño, Edgar Iván},
title = {Analysis of the Steelmaking Process via Data Mining and Pearson Correlation},
journal = {Materials},
year = {2024},
volume = {17},
number = {11},
pages = {2786},
doi = {10.3390/ma17112786}
}
EUVIMED