EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Impact of Temperature Optimization of ITO Thin Film on Tandem Solar Cell Efficiency

Elif Damgaci iD, Emre Kartal iD, Furkan Gucluer iD, Ayse Seyhan iD, Yuksel Kaplan iD

Materials · 06.06.2024 · 17 (11) · 2784

DOI: 10.3390/ma17112784 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Materials, online erschienen am 06.06.2024. Verfasst von Elif Damgaci und 4 weiteren Autor:innen. Beteiligte Einrichtung: Department of Mechanical Engineering, Nigde Omer Halisdemir University, Nigde 51240, Türkiye. Die Arbeit wurde bisher 14-mal zitiert (Crossref) und nennt 55 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: The Scientific and Technological Research Council of Turkey.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

This study examined the impact of temperature optimization on indium tin oxide (ITO) films in monolithic HJT/perovskite tandem solar cells. ITO films were deposited using magnetron sputtering at temperatures ranging from room temperature (25 °C) to 250 °C. The sputtering target was ITO, with a mass ratio of In2O3 to SnO2 of 90% to 10%. The effects of temperature on the ITO film were analyzed using X-ray diffraction (XRD), spectroscopic ellipsometry, and sheet resistance measurements. Results showed that all ITO films exhibited a polycrystalline morphology, with diffraction peaks corresponding to planes (211), (222), (400), (440), and (622), indicating a cubic bixbyite crystal structure. The light transmittance exceeded 80%, and the sheet resistance was 75.1 Ω/sq for ITO deposited at 200 °C. The optical bandgap of deposited ITO films ranged between 3.90 eV and 3.93 eV. Structural and morphological characterization of the perovskite solar cell was performed using XRD and FE-SEM. Tandem solar cell performance was evaluated by analyzing current density-voltage characteristics under simulated sunlight. By optimizing the ITO deposition temperature, the tandem cell achieved a power conversion efficiency (PCE) of 16.74%, resulting in enhanced tandem cell efficiency.

Schlagwörter

Stichwörter der Autor:innen

deposition temperatureindium tin oxide (ITO)perovskitesilicon heterojunctiontandem solar cell

Autor:innen und Institutionen

  • Department of Mechanical Engineering, Nigde Omer Halisdemir University, Nigde 51240, Türkiye.
  • Nanotechnology Application and Research Center, Nigde Omer Halisdemir University, Nigde 51240, Türkiye.
  • Department of Physics, Nigde Omer Halisdemir University, Nigde 51240, Türkiye.

ORCID-Profile: Elif Damgaci, Emre Kartal, Furkan Gucluer, Ayse Seyhan, Yuksel Kaplan

Förderung

  • The Scientific and Technological Research Council of Turkey

Zitieren

APA

Damgaci, E., Kartal, E., Gucluer, F., Seyhan, A., & Kaplan, Y. (2024). Impact of Temperature Optimization of ITO Thin Film on Tandem Solar Cell Efficiency. Materials, 17(11), 2784. https://doi.org/10.3390/ma17112784

Vancouver

Damgaci E, Kartal E, Gucluer F, Seyhan A, Kaplan Y. Impact of Temperature Optimization of ITO Thin Film on Tandem Solar Cell Efficiency. Materials. 2024;17(11):2784. doi:10.3390/ma17112784

BibTeX
@article{Damgaci2024,
  author = {Damgaci, Elif and Kartal, Emre and Gucluer, Furkan and Seyhan, Ayse and Kaplan, Yuksel},
  title = {Impact of Temperature Optimization of ITO Thin Film on Tandem Solar Cell Efficiency},
  journal = {Materials},
  year = {2024},
  volume = {17},
  number = {11},
  pages = {2784},
  doi = {10.3390/ma17112784}
}
Kostenlos starten →