EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Experimental Analysis of Effect of Machined Material on Cutting Forces during Drilling

Josef Sklenička iD, Jan Hnátík iD, Jaroslava Fulemová, Miroslav Gombár, Alena Vagaská, Aneta Jirásko

Materials · 06.06.2024 · 17 (11) · 2775

DOI: 10.3390/ma17112775 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Materials, online erschienen am 06.06.2024. Verfasst von Josef Sklenička und 5 weiteren Autor:innen. Beteiligte Einrichtung: Department of Machining Technology, Faculty of Mechanical Engineering, University of West Bohemia, Univerzitní 22, 301 00 Pilsen, Czech Republic. Die Arbeit wurde bisher 4-mal zitiert (Crossref) und nennt 64 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: SGS-2022-007/2022-2024, Výzkum a vývoj pro inovace v oboru strojírenská technologie-technologie obrábění.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Current research studies devoted to cutting forces in drilling are oriented toward predictive model development, however, in the case of mechanistic models, the material effect on the drilling process itself is mostly not considered. This research study aims to experimentally analyze how the machined material affects the feed force (Ff) during drilling, alongside developing predictive mathematical–statistical models to understand the main effects and interactions of the considered technological and tool factors on Ff. By conducting experiments involving six factors (feed, cutting speed, drill diameter, point angle, lip relief angle, and helix angle) at five levels, the drilling process of stainless steel AISI1045 and case-hardened steel 16MnCr5 is executed to validate the numerical accuracy of the established prediction models (AdjR = 99.600% for C45 and AdjR = 97.912% for 16MnCr5). The statistical evaluation (ANOVA, RSM, and Lack of Fit) of the data proves that the drilled material affects the Ff value at the level of 17.600% (p < 0.000). The effect of feed represents 44.867% in C45 and 34.087% in 16MnCr5; the cutting speed is significant when machining C45 steel only (9.109%). When machining 16MnCr5 compared to C45 steel, the influence of the point angle (lip relief angle) is lower by 49.198% (by 22.509%). The effect of the helix angle is 163.060% higher when machining 16MnCr5.

Schlagwörter

Stichwörter der Autor:innen

DOEcase-hardened steel 16MnCr5central composite designcutting forcesdrillingpredictive mathematical–statistical modelssteel C45 (AISI 1045)

Autor:innen und Institutionen

  • Department of Machining Technology, Faculty of Mechanical Engineering, University of West Bohemia, Univerzitní 22, 301 00 Pilsen, Czech Republic.

ORCID-Profile: Josef Sklenička, Jan Hnátík

Förderung

  • SGS-2022-007/2022-2024
  • Výzkum a vývoj pro inovace v oboru strojírenská technologie-technologie obrábění

Zitieren

APA

Sklenička, J., Hnátík, J., Fulemová, J., Gombár, M., Vagaská, A., & Jirásko, A. (2024). Experimental Analysis of Effect of Machined Material on Cutting Forces during Drilling. Materials, 17(11), 2775. https://doi.org/10.3390/ma17112775

Vancouver

Sklenička J, Hnátík J, Fulemová J, Gombár M, Vagaská A, Jirásko A. Experimental Analysis of Effect of Machined Material on Cutting Forces during Drilling. Materials. 2024;17(11):2775. doi:10.3390/ma17112775

BibTeX
@article{Sklenika2024,
  author = {Sklenička, Josef and Hnátík, Jan and Fulemová, Jaroslava and Gombár, Miroslav and Vagaská, Alena and Jirásko, Aneta},
  title = {Experimental Analysis of Effect of Machined Material on Cutting Forces during Drilling},
  journal = {Materials},
  year = {2024},
  volume = {17},
  number = {11},
  pages = {2775},
  doi = {10.3390/ma17112775}
}
Kostenlos starten →