Enhancing Mesopore Volume and Thermal Insulation of Silica Aerogel via Ambient Pressure Drying-Assisted Foaming Method
Materials · 30.05.2024 · 17 (11) · 2641
DOI: 10.3390/ma17112641 ↗Kurz gefasst
Fachartikel in der Zeitschrift Materials, online erschienen am 30.05.2024. Verfasst von Jinjing Guo und 4 weiteren Autor:innen. Beteiligte Einrichtung: Department of Chemical Engineering, Tsinghua University, Beijing 100084, China. Die Arbeit wurde bisher 8-mal zitiert (Crossref) und nennt 33 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Natural Science Foundation of China, National Key Research and Development Program of China, Tsinghua University Scientific Research Project.
Abstract (Originalsprache)
Ambient pressure drying (APD) of silica aerogels has emerged as an attractive method adapting to large-scale production. Spring-back is a unique phenomenon during APD of silica aerogels with volume expansion after its shrinkage under capillary force. We attribute the intense spring-back at elevated drying temperatures to a dense structure formed on the surface and the formation of positive internal pressure. Furthermore, an APD-assisted foaming method with an in situ introduction of NH4HCO3 was proposed. NH4HCO3 decomposing at drying temperatures hastened the emergence of positive pressure, thereby increasing the expansion volume. Compared to the previous method, the porosity of silica aerogel increased from 82.2% to 92.6%, and mesopore volume from 1.79 cm3 g−1 to 4.54 cm3 g−1. By adjusting the amount of the silicon source, silica aerogels prepared by the APD-assisted foaming method generated higher volume expansion and lower thermal conductivity. After calcination to remove undecomposed ammonium salts, the hydrophobic silica aerogel with a density of 0.112 g cm−3 reached a mesopore volume of 5.07 cm3 g−1 and a thermal conductivity of 18.9 mW m−1·K−1. This strategy not only improves the thermal insulation properties, but also offers a significant advancement in tailoring silica aerogels with specific porosity and mesopore volume for various applications.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- Department of Chemical Engineering, Tsinghua University, Beijing 100084, China.
ORCID-Profile: Jun Xu, Baohua Guo
Förderung
- National Natural Science Foundation of China
- National Key Research and Development Program of China
- Tsinghua University Scientific Research Project
Zitieren
APA
Guo, J., Luo, K., Zou, W., Xu, J., & Guo, B. (2024). Enhancing Mesopore Volume and Thermal Insulation of Silica Aerogel via Ambient Pressure Drying-Assisted Foaming Method. Materials, 17(11), 2641. https://doi.org/10.3390/ma17112641
Vancouver
Guo J, Luo K, Zou W, Xu J, Guo B. Enhancing Mesopore Volume and Thermal Insulation of Silica Aerogel via Ambient Pressure Drying-Assisted Foaming Method. Materials. 2024;17(11):2641. doi:10.3390/ma17112641
BibTeX
@article{Guo2024,
author = {Guo, Jinjing and Luo, Kaiqiang and Zou, Wenqi and Xu, Jun and Guo, Baohua},
title = {Enhancing Mesopore Volume and Thermal Insulation of Silica Aerogel via Ambient Pressure Drying-Assisted Foaming Method},
journal = {Materials},
year = {2024},
volume = {17},
number = {11},
pages = {2641},
doi = {10.3390/ma17112641}
}
EUVIMED