EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

High-Temperature Tensile Characteristics of an Al–Zn–Mg–Cu Alloy: Fracture Characteristics and a Physical Mechanism Constitutive Model

Daoguang He iD, Yuan Chen, Shibing Chen, Yongcheng Lin iD, Jiafu Wu

Materials · 29.05.2024 · 17 (11) · 2628

DOI: 10.3390/ma17112628 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Materials, online erschienen am 29.05.2024. Verfasst von Daoguang He und 4 weiteren Autor:innen. Beteiligte Einrichtung: School of Mechanical and Electrical Engineering, Central South University, Changsha 410083, China. Die Arbeit wurde bisher 6-mal zitiert (Crossref) und nennt 45 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Natural Science Foundation of China, National Key Research and Development Program of China, Hunan Provincial Natural Science Foundation of China.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

High-temperature tensile tests were developed to explore the flow features of an Al-Zn-Mg-Cu alloy. The fracture characteristics and microstructural evolution mechanisms were thoroughly revealed. The results demonstrated that both intergranular fractures and ductile fractures occurred, which affected the hot tensile fracture mechanism. During high-temperature tensile, the second phase (Al2CuMg) at the grain boundaries (GBs) promoted the formation and accumulation of dimples. With the continual progression of high-temperature tensile, the aggregation/coarsening of dimples along GBs appear, aggravating the intergranular fracture. The coalescence and coarsen of dimples are reinforced at higher tensile temperatures or lower strain rates. Considering the impact of microstructural evolution and dimple formation/coarsening on tensile stresses, a physical mechanism constitutive (PMC) equation is herein proposed. According to the validation and analysis, the predictive results were in preferable accordance with the testing data, showing the outstanding reconfiguration capability of the PMC model for high-temperature tensile features in Al–Zn–Mg–Cu alloys.

Schlagwörter

Stichwörter der Autor:innen

Al–Zn–Mg–Cu alloyconstitutive modelfracture mechanismhigh-temperature tensile behavior

Autor:innen und Institutionen

  • School of Mechanical and Electrical Engineering, Central South University, Changsha 410083, China.
  • State Key Laboratory of Precision Manufacturing for Extreme Service Performance, Central South University, Changsha 410083, China.

ORCID-Profile: Daoguang He, Yongcheng Lin

Förderung

  • National Natural Science Foundation of China
  • National Key Research and Development Program of China
  • Hunan Provincial Natural Science Foundation of China
  • State Key Laboratory of Featured Metal Materials and Life-cycle Safety for Composite Structures

Zitieren

APA

He, D., Chen, Y., Chen, S., Lin, Y., & Wu, J. (2024). High-Temperature Tensile Characteristics of an Al–Zn–Mg–Cu Alloy: Fracture Characteristics and a Physical Mechanism Constitutive Model. Materials, 17(11), 2628. https://doi.org/10.3390/ma17112628

Vancouver

He D, Chen Y, Chen S, Lin Y, Wu J. High-Temperature Tensile Characteristics of an Al–Zn–Mg–Cu Alloy: Fracture Characteristics and a Physical Mechanism Constitutive Model. Materials. 2024;17(11):2628. doi:10.3390/ma17112628

BibTeX
@article{He2024,
  author = {He, Daoguang and Chen, Yuan and Chen, Shibing and Lin, Yongcheng and Wu, Jiafu},
  title = {High-Temperature Tensile Characteristics of an Al–Zn–Mg–Cu Alloy: Fracture Characteristics and a Physical Mechanism Constitutive Model},
  journal = {Materials},
  year = {2024},
  volume = {17},
  number = {11},
  pages = {2628},
  doi = {10.3390/ma17112628}
}
Kostenlos starten →