EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Research on Lateral Resistance Performance of Prestressed Cross-Laminated Timber–Concrete Composite Structures under Reciprocating Loads

Yong Xu, Xin Huang, Yingda Zhang iD, Yusen Qu, Yujie Fan, Guoqin Yang

Materials · 21.05.2024 · 17 (11) · 2485

DOI: 10.3390/ma17112485 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Materials, online erschienen am 21.05.2024. Verfasst von Yong Xu und 5 weiteren Autor:innen. Beteiligte Einrichtung: School of Architecture and Civil Engineering, Xihua University, Chengdu 610039, China. Die Arbeit wurde bisher 4-mal zitiert (Crossref) und nennt 32 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Natural Science Foundation of China, Innovation and Entrepreneurship Project of Xihua University, Horizontal Research Project of Xihua University.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Cross-Laminated Timber (CLT) and concrete composite structures represent an architectural system that integrates the strengths of both materials. In this innovative configuration, the CLT and concrete collaborate synergistically, harnessing their individual merits to achieve enhanced structural performance and functionality. Specifically, the CLT offers a lightweight design, superior bending resistance, and immense engineering plasticity, while concrete boasts exceptional compressive strength and durability. This study investigates the mechanical performance of CLT–concrete composite structures through quasi-static reciprocating loading tests in three full-scale CLT shear wall samples. Designed with varying initial prestressing forces and dimensions of the CLT panel, the prestressed CLT–concrete structures demonstrated a reduced dependence on the steel nodes, resulting in an increase in yield load, yield displacement, and maximum load-carrying capacity. Maximum capacity increased by 39.8% and 33.7% under initial prestressing forces of 23 kN and 46 kN on steel strands. Failure occurred due to localized compressive failure on prestressed steel strands and anchor plates. ABAQUS finite element analysis established three refined models, revealing that the increased initial prestressing force moderately enhanced stiffness but reduced ductility under similar cross-sectional dimensions. Furthermore, under consistent CLT material, dimensions, prestressing force, and loading conditions, prestressed CLT–concrete structures exhibited a higher maximum load-bearing capacity than prestressed CLT–steel composite structures. This study proposes structural design recommendations based on experimental and simulation results, incorporating specific assumptions.

Schlagwörter

Stichwörter der Autor:innen

concretecross-laminated timberfinite element analysisprestressingreciprocating loading teststructural analysistimber shear wall

Autor:innen und Institutionen

  • School of Architecture and Civil Engineering, Xihua University, Chengdu 610039, China.

ORCID-Profile: Yingda Zhang

Förderung

  • National Natural Science Foundation of China
  • Innovation and Entrepreneurship Project of Xihua University
  • Horizontal Research Project of Xihua University

Zitieren

APA

Xu, Y., Huang, X., Zhang, Y., Qu, Y., Fan, Y., & Yang, G. (2024). Research on Lateral Resistance Performance of Prestressed Cross-Laminated Timber–Concrete Composite Structures under Reciprocating Loads. Materials, 17(11), 2485. https://doi.org/10.3390/ma17112485

Vancouver

Xu Y, Huang X, Zhang Y, Qu Y, Fan Y, Yang G. Research on Lateral Resistance Performance of Prestressed Cross-Laminated Timber–Concrete Composite Structures under Reciprocating Loads. Materials. 2024;17(11):2485. doi:10.3390/ma17112485

BibTeX
@article{Xu2024,
  author = {Xu, Yong and Huang, Xin and Zhang, Yingda and Qu, Yusen and Fan, Yujie and Yang, Guoqin},
  title = {Research on Lateral Resistance Performance of Prestressed Cross-Laminated Timber–Concrete Composite Structures under Reciprocating Loads},
  journal = {Materials},
  year = {2024},
  volume = {17},
  number = {11},
  pages = {2485},
  doi = {10.3390/ma17112485}
}
Kostenlos starten →