EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Analysis of the Asymmetrical Rolling of Ultra-Thin Strips Considering Elastic Deformation of the Strips

Qilin Zhao iD, Xianlei Hu, Xianghua Liu

Materials · 20.05.2024 · 17 (10) · 2467

DOI: 10.3390/ma17102467 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Materials, online erschienen am 20.05.2024. Verfasst von Qilin Zhao und 2 weiteren Autor:innen. Beteiligte Einrichtung: School of Materials Science and Engineering, Northeastern University, Shenyang 110819, China. Die Arbeit wurde bisher 4-mal zitiert (Crossref) und nennt 28 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Natural Science Foundation of China.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

In normal cold rolling, the elastic deformation of the strip is typically ignored because of the dominant plastic deformation. However, this neglect may introduce additional errors when the strip is very thin. The aim of this study is to investigate the characteristics of the deformation region and thickness reduction in the asymmetrical rolling of ultra-thin strips. Mathematical models were developed based on the slab method, with consideration of the elastic deformation of the strips, and employed in the simulation calculation. The percentage of the three zones and the thickness reduction were analyzed using the simulation results. An increase in the speed ratio results in an increase in the reduction ratio, which is influenced by parameters, such as front tension, back tension, friction coefficient, and entry thickness. The elastic deformation of the strip reduces the tension and the roll pressure and causes the reduction ratio to decrease. The findings and conclusions of this study may be helpful to the mill operating in the asymmetrical rolling process of ultra-thin strips.

Schlagwörter

Stichwörter der Autor:innen

asymmetrical rollingelastic deformation of the stripelastic recovery zonemathematic modelslab methodultra-thin strip

Autor:innen und Institutionen

  • School of Materials Science and Engineering, Northeastern University, Shenyang 110819, China.
  • State Key Laboratory of Rolling and Automation, Northeastern University, Shenyang 110819, China.

ORCID-Profile: Qilin Zhao

Förderung

  • National Natural Science Foundation of China

Zitieren

APA

Zhao, Q., Hu, X., & Liu, X. (2024). Analysis of the Asymmetrical Rolling of Ultra-Thin Strips Considering Elastic Deformation of the Strips. Materials, 17(10), 2467. https://doi.org/10.3390/ma17102467

Vancouver

Zhao Q, Hu X, Liu X. Analysis of the Asymmetrical Rolling of Ultra-Thin Strips Considering Elastic Deformation of the Strips. Materials. 2024;17(10):2467. doi:10.3390/ma17102467

BibTeX
@article{Zhao2024,
  author = {Zhao, Qilin and Hu, Xianlei and Liu, Xianghua},
  title = {Analysis of the Asymmetrical Rolling of Ultra-Thin Strips Considering Elastic Deformation of the Strips},
  journal = {Materials},
  year = {2024},
  volume = {17},
  number = {10},
  pages = {2467},
  doi = {10.3390/ma17102467}
}
Kostenlos starten →