Characteristics of Si (C,N) Silicon Carbonitride Layers on the Surface of Ni–Cr Alloys Used in Dental Prosthetics
Materials · 19.05.2024 · 17 (10) · 2450
DOI: 10.3390/ma17102450 ↗Kurz gefasst
Fachartikel in der Zeitschrift Materials, online erschienen am 19.05.2024. Verfasst von Leszek Klimek und 3 weiteren Autor:innen. Beteiligte Einrichtung: Institute of Materials Science and Engineering, Faculty of Mechanical Engineering, Lodz University of Technology, B. Stefanowskiego 1/15, 90-924 Lodz…. Die Arbeit wurde bisher 7-mal zitiert (Crossref) und nennt 57 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).
Abstract (Originalsprache)
Chromium- and cobalt-based alloys, as well as chrome–nickel steels, are most used in dental prosthetics. Unfortunately, these alloys, especially nickel-based alloys, can cause allergic reactions. A disadvantage of these alloys is also insufficient corrosion resistance. To improve the properties of these alloys, amorphous Si (C,N) coatings were deposited on the surfaces of metal specimens. This paper characterizes coatings of silicon carbide nitrides, deposited by the magnetron sputtering method on the surface of nickel–chromium alloys used in dental prosthetics. Depending on the deposition parameters, coatings with varying carbon to nitrogen ratios were obtained. The study analyzed their structure and chemical and phase composition. In addition, a study of surface wettability and surface roughness was performed. Based on the results obtained, it was found that amorphous coatings of Si (C,N) type with thicknesses of 2 to 4.5 µm were obtained. All obtained coatings increase the value of surface free energy. The study showed that Si (C,N)-type films can be used in dental prosthetics as protective coatings.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- Institute of Materials Science and Engineering, Faculty of Mechanical Engineering, Lodz University of Technology, B. Stefanowskiego 1/15, 90-924 Lodz, Poland.
- Department of Dental Technology, Medical University of Lodz, Pomorska Str. 251, 92-213 Lodz, Poland.
ORCID-Profile: Leszek Klimek, Marcin Makówka, Anna Sobczyk-Guzenda, Zofia Kula
Zitieren
APA
Klimek, L., Makówka, M., Sobczyk-Guzenda, A., & Kula, Z. (2024). Characteristics of Si (C,N) Silicon Carbonitride Layers on the Surface of Ni–Cr Alloys Used in Dental Prosthetics. Materials, 17(10), 2450. https://doi.org/10.3390/ma17102450
Vancouver
Klimek L, Makówka M, Sobczyk-Guzenda A, Kula Z. Characteristics of Si (C,N) Silicon Carbonitride Layers on the Surface of Ni–Cr Alloys Used in Dental Prosthetics. Materials. 2024;17(10):2450. doi:10.3390/ma17102450
BibTeX
@article{Klimek2024,
author = {Klimek, Leszek and Makówka, Marcin and Sobczyk-Guzenda, Anna and Kula, Zofia},
title = {Characteristics of Si (C,N) Silicon Carbonitride Layers on the Surface of Ni–Cr Alloys Used in Dental Prosthetics},
journal = {Materials},
year = {2024},
volume = {17},
number = {10},
pages = {2450},
doi = {10.3390/ma17102450}
}
EUVIMED