EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Influence of Nickel on Microstructure and Mechanical Properties in Medium-Carbon Spring Steel

Qian Yu iD, Yuliang Zhao iD, Feiyu Zhao iD

Materials · 17.05.2024 · 17 (10) · 2423

DOI: 10.3390/ma17102423 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Materials, online erschienen am 17.05.2024. Verfasst von Qian Yu und 2 weiteren Autor:innen. Beteiligte Einrichtung: The State Key Laboratory of Rolling and Automation, Northeastern University, Shenyang 110189, China. Die Arbeit wurde bisher 15-mal zitiert (Crossref) und nennt 43 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The effects of adding nickel on the phase transition temperature, microstructure, and mechanical properties of medium-carbon spring steel have been investigated. The results show that adding nickel reduces the martensite start (Ms) temperature, improves hardenability, and refines the sub-microstructure of the martensite, thereby improving yield stress. The yield strength of martensitic steel increases by approximately 100 MPa due to a synergistic combination of grain refinement strengthening and dislocation strengthening, with an increase in the nickel content from 0 wt.% to 1 wt.%. The cryogenic impact toughness of martensitic steel also improved with a higher nickel content due to packet and block refinement and an increase in the proportion of high-angle grain boundaries (HAGBs).

Schlagwörter

Stichwörter der Autor:innen

impact toughnessmartensitenickel contentspring steelyield strength

Autor:innen und Institutionen

  • The State Key Laboratory of Rolling and Automation, Northeastern University, Shenyang 110189, China.
  • Materalia Group, Department of Physical Metallurgy, Centro Nacional de Investigaciones Metalurgicas (CENIM-CSIC), Av. Gregorio del Amo 8, 28040 Madrid, Spain.
  • Neutron Scattering Technical Engineering Research Centre, School of Mechanical Engineering, Dongguan University of Technology, Dongguan 523808, China.

ORCID-Profile: Qian Yu, Yuliang Zhao, Feiyu Zhao

Zitieren

APA

Yu, Q., Zhao, Y., & Zhao, F. (2024). Influence of Nickel on Microstructure and Mechanical Properties in Medium-Carbon Spring Steel. Materials, 17(10), 2423. https://doi.org/10.3390/ma17102423

Vancouver

Yu Q, Zhao Y, Zhao F. Influence of Nickel on Microstructure and Mechanical Properties in Medium-Carbon Spring Steel. Materials. 2024;17(10):2423. doi:10.3390/ma17102423

BibTeX
@article{Yu2024,
  author = {Yu, Qian and Zhao, Yuliang and Zhao, Feiyu},
  title = {Influence of Nickel on Microstructure and Mechanical Properties in Medium-Carbon Spring Steel},
  journal = {Materials},
  year = {2024},
  volume = {17},
  number = {10},
  pages = {2423},
  doi = {10.3390/ma17102423}
}
Kostenlos starten →