EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

The Effect of Ageing on Phase Transformations and Mechanical Behaviour in Ni-Rich NiTi Alloys

Jerzy Ratajski, Błażej Bałasz iD, Katarzyna Mydłowska iD, Mieczysław Pancielejko iD, Łukasz Szparaga

Materials · 17.05.2024 · 17 (10) · 2420

DOI: 10.3390/ma17102420 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Materials, online erschienen am 17.05.2024. Verfasst von Jerzy Ratajski und 4 weiteren Autor:innen. Beteiligte Einrichtung: Department of Biomedical Engineering, Faculty of Mechanical and Power Engineering, Koszalin University of Technology (KUT), ul. Śniadeckich 2, 75-453…. Die Arbeit wurde bisher 14-mal zitiert (Crossref) und nennt 51 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

In this article, the results of research on a NiTi alloy with a high nickel content (51.7 at.%), produced using the additive technology SLM method and subjected to isothermal ageing after solution annealing, are presented. The study involved the determination of the sequence of phase transformations occurring using differential scanning calorimetry (DSC) and the determination of the temperature range of these transformations. In parallel, the phase composition was determined using the XRD method; the hardness and the Young’s modulus were also determined. The analysis of the DSC results obtained indicates the following characteristic features of the NiTi alloy, which change with ageing time: (1) During cooling (from +150 °C to −50 °C), the type of transformation changes from a one-step transformation after solution annealing to a two-step transformation after the ageing process over 1, 20, and 100 h at 500 °C; (2) during heating (from −50 °C to +150 °C) for all the samples, regardless of the ageing time, only a one-step transformation from martensite M(B19′) to austenite A(B2) is observed; (3) the temperature at which the transformation starts increases with the ageing time; (4) the width of the total temperature range of the transformation M(B19′) → A(B2) during heating changes from large (ΔT = 49.7 °C), after solution annealing, to narrow (ΔT = 19.3 °C and ΔT = 17.9 °C after 20 h and 100 h of ageing); and, most importantly, (5) a comparison with the literature data shows that, irrespective of the composition of the NiTi alloy and the manufacturing technology of the alloy samples (regardless of whether this was traditional or additive technology), a sufficiently long ageing process period leads to the occurrence of the martensite → austenite transformation in the same temperature range.

Schlagwörter

Stichwörter der Autor:innen

NiTiSLMadditive manufacturingageingphase transformationsolution annealing

Autor:innen und Institutionen

  • Department of Biomedical Engineering, Faculty of Mechanical and Power Engineering, Koszalin University of Technology (KUT), ul. Śniadeckich 2, 75-453 Koszalin, Poland.
  • Rapid Prototyping Center, Faculty of Mechanical and Power Engineering, Koszalin University of Technology (KUT), ul. Śniadeckich 2, 75-453 Koszalin, Poland.
  • Department of Technical Physics and Nanotechnology, Faculty of Mechanical and Power Engineering, Koszalin University of Technology (KUT), ul. Śniadeckich 2, 75-453 Koszalin, Poland.

ORCID-Profile: Błażej Bałasz, Katarzyna Mydłowska, Mieczysław Pancielejko

Zitieren

APA

Ratajski, J., Bałasz, B., Mydłowska, K., Pancielejko, M., & Szparaga, Ł. (2024). The Effect of Ageing on Phase Transformations and Mechanical Behaviour in Ni-Rich NiTi Alloys. Materials, 17(10), 2420. https://doi.org/10.3390/ma17102420

Vancouver

Ratajski J, Bałasz B, Mydłowska K, Pancielejko M, Szparaga Ł. The Effect of Ageing on Phase Transformations and Mechanical Behaviour in Ni-Rich NiTi Alloys. Materials. 2024;17(10):2420. doi:10.3390/ma17102420

BibTeX
@article{Ratajski2024,
  author = {Ratajski, Jerzy and Bałasz, Błażej and Mydłowska, Katarzyna and Pancielejko, Mieczysław and Szparaga, Łukasz},
  title = {The Effect of Ageing on Phase Transformations and Mechanical Behaviour in Ni-Rich NiTi Alloys},
  journal = {Materials},
  year = {2024},
  volume = {17},
  number = {10},
  pages = {2420},
  doi = {10.3390/ma17102420}
}
Kostenlos starten →