EUVIMEDEUVIMED entdecken
ÜbersichtsarbeitOpen Access · CC BY 4.0

Progress Made in Non-Metallic-Doped Materials for Electrocatalytic Reduction in Ammonia Production

Gerald D S Quoie iD, Mingshuo Jiao, Krisztina Lászlód iD, Ying Wang

Materials · 17.05.2024 · 17 (10) · 2419

DOI: 10.3390/ma17102419 ↗

Kurz gefasst

Übersichtsarbeit in der Zeitschrift Materials, online erschienen am 17.05.2024. Verfasst von Gerald D S Quoie und 3 weiteren Autor:innen. Beteiligte Einrichtung: State Key Laboratory of Pollution Control and Resources Reuse, College of Environmental Science and Engineering, Tongji University, Shanghai 200092, …. Die Arbeit wurde bisher 8-mal zitiert (Crossref) und nennt 175 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: the Shanghai Municipal Committee of Science and Technology, Shanghai Municipal Committee of Science and Technology.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The electrocatalytic production of ammonia has garnered considerable interest as a potentially sustainable technology for ammonia synthesis. Recently, non-metallic-doped materials have emerged as promising electrochemical catalysts for this purpose. This paper presents a comprehensive review of the latest research on non-metallic-doped materials for electrocatalytic ammonia production. Researchers have engineered a variety of materials, doped with non-metals such as nitrogen (N), boron (B), phosphorus (P), and sulfur (S), into different forms and structures to enhance their electrocatalytic activity and selectivity. A comparison among different non-metallic dopants reveals their distinct effects on the electrocatalytic performance for ammonia production. For instance, N-doping has shown enhanced activity owing to the introduction of nitrogen vacancies (NVs) and improved charge transfer kinetics. B-doping has demonstrated improved selectivity and stability, which is attributed to the formation of active sites and the suppression of competing reactions. P-doping has exhibited increased ammonia generation rates and Faradaic efficiencies, likely due to the modification of the electronic structure and surface properties. S-doping has shown potential for enhancing electrocatalytic performance, although further investigations are needed to elucidate the underlying mechanisms. These comparisons provide valuable insights for researchers to conduct in-depth studies focusing on specific non-metallic dopants, exploring their unique properties, and optimizing their performance for electrocatalytic ammonia production. However, we consider it a priority to provide insight into the recent progress made in non-metal-doped materials and their potential for enabling long-term and efficient electrochemical ammonia production. Additionally, this paper discusses the synthetic procedures used to produce non-metal-doped materials and highlights the advantages and disadvantages of each method. It also provides an in-depth analysis of the electrochemical performance of these materials, including their Faradaic efficiencies, ammonia yield rate, and selectivity. It examines the challenges and prospects of developing non-metallic-doped materials for electrocatalytic ammonia production and suggests future research directions.

Schlagwörter

Stichwörter der Autor:innen

ammoniabiomass-derived carbondefect engineeringelectrocatalysisnitrate reductionnon-metallic-doped catalysts

Autor:innen und Institutionen

  • State Key Laboratory of Pollution Control and Resources Reuse, College of Environmental Science and Engineering, Tongji University, Shanghai 200092, China.
  • Shanghai Institute of Pollution Control and Ecological Security, Shanghai 200092, China.
  • Department of Physical Chemistry and Materials Science, Budapest University of Technology and Economics, H-1521 Budapest, Hungary.

ORCID-Profile: Gerald D S Quoie, Krisztina Lászlód

Förderung

  • the Shanghai Municipal Committee of Science and Technology
  • Shanghai Municipal Committee of Science and Technology

Zitieren

APA

Quoie, G. D. S., Jiao, M., Lászlód, K., & Wang, Y. (2024). Progress Made in Non-Metallic-Doped Materials for Electrocatalytic Reduction in Ammonia Production. Materials, 17(10), 2419. https://doi.org/10.3390/ma17102419

Vancouver

Quoie GDS, Jiao M, Lászlód K, Wang Y. Progress Made in Non-Metallic-Doped Materials for Electrocatalytic Reduction in Ammonia Production. Materials. 2024;17(10):2419. doi:10.3390/ma17102419

BibTeX
@article{Quoie2024,
  author = {Quoie, Gerald D S and Jiao, Mingshuo and Lászlód, Krisztina and Wang, Ying},
  title = {Progress Made in Non-Metallic-Doped Materials for Electrocatalytic Reduction in Ammonia Production},
  journal = {Materials},
  year = {2024},
  volume = {17},
  number = {10},
  pages = {2419},
  doi = {10.3390/ma17102419}
}
Kostenlos starten →