Research on Laser Cleaning Technology for Aircraft Skin Surface Paint Layer
Materials · 17.05.2024 · 17 (10) · 2414
DOI: 10.3390/ma17102414 ↗Kurz gefasst
Fachartikel in der Zeitschrift Materials, online erschienen am 17.05.2024. Verfasst von Jinxuan Li und 5 weiteren Autor:innen. Beteiligte Einrichtung: College of Electron and Information, University of Electronic Science and Technology of China, Zhongshan Institute, Zhongshan 528402, China. Die Arbeit wurde bisher 20-mal zitiert (Crossref) und nennt 28 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: the National Key R&D Program of China, the Natural Science Foundation of China, the Natural Science Foundation of Guangdong Province.
Abstract (Originalsprache)
In this study, a pulsed laser operating at a wavelength of 1064 nm and with a pulse width of 100 ns was utilized for the removal of paint from the surface of a 2024 aluminum alloy. The experimental investigation was conducted to analyze the influence of laser parameters on the efficacy of paint layer removal from the aircraft skin’s surface and the subsequent evolution in the microstructure of the laser-treated aluminum alloy substrate. The mechanism underlying laser cleaning was explored through simulation. The findings revealed that power density and scanning speed significantly affected the quality of cleaning. Notably, there were discernible damage thresholds and optimal cleaning parameters in repetitive frequency, with a power density of 178.25 MW/cm2, scanning speed of 500 mm/s, and repetitive frequency of 40 kHz identified as the primary optimal settings for achieving the desired cleaning effect. Thermal ablation and thermal vibration were identified as the principal mechanisms of cleaning. Moreover, laser processing induced surface dislocations and concentrated stress, accompanied by grain refinement, on the aluminum substrate.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- College of Electron and Information, University of Electronic Science and Technology of China, Zhongshan Institute, Zhongshan 528402, China.
- College of Physics and Optoelectronic Engineering, Shenzhen University, Shenzhen 518060, China.
ORCID-Profile: Jianjun Yang
Förderung
- the National Key R&D Program of China
- the Natural Science Foundation of China
- the Natural Science Foundation of Guangdong Province
- the Guangdong Provincial Department of Education Key Fields Special Project
- National Key R&D Program of China
- Natural Science Foundation of China
- Natural Science Foundation of Guangdong Province
- Guangdong Provincial Department of Education Key Fields Special Project
Zitieren
APA
Li, J., Yang, J., Liu, J., Chen, H., Duan, Y., & Pan, X. (2024). Research on Laser Cleaning Technology for Aircraft Skin Surface Paint Layer. Materials, 17(10), 2414. https://doi.org/10.3390/ma17102414
Vancouver
Li J, Yang J, Liu J, Chen H, Duan Y, Pan X. Research on Laser Cleaning Technology for Aircraft Skin Surface Paint Layer. Materials. 2024;17(10):2414. doi:10.3390/ma17102414
BibTeX
@article{Li2024,
author = {Li, Jinxuan and Yang, Jianjun and Liu, Jiaxuan and Chen, Hui and Duan, Yunfei and Pan, Xinjian},
title = {Research on Laser Cleaning Technology for Aircraft Skin Surface Paint Layer},
journal = {Materials},
year = {2024},
volume = {17},
number = {10},
pages = {2414},
doi = {10.3390/ma17102414}
}
EUVIMED