Preparation and Hydration Properties of Sodium Silicate-Activated Municipal Solid Waste Incineration Bottom Ash Composite Ground-Granulated Blast Furnace Slag Cementitious Materials
Materials · 17.05.2024 · 17 (10) · 2406
DOI: 10.3390/ma17102406 ↗Kurz gefasst
Fachartikel in der Zeitschrift Materials, online erschienen am 17.05.2024. Verfasst von Juan Deng und 3 weiteren Autor:innen. Beteiligte Einrichtung: School of Civil Engineering, Chongqing Jiaotong University, Chongqing 400074, China. Die Arbeit wurde bisher 5-mal zitiert (Crossref) und nennt 47 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).
Abstract (Originalsprache)
The production of municipal solid waste incineration bottom ash (MSWIBA) is substantial and has the potential to replace cement, despite challenges such as complex composition, uneven particle size distribution, and low reactivity. This paper employs sodium silicate activation of MSWIBA composite Ground-granulated Blast Furnace slag (GGBS) to improve the reactivity in preparing composite cementitious materials. It explores the hydration performance of the composite cementitious materials using isothermal calorimetric analysis, Fourier-transform infrared (FTIR) spectroscopy, XRD physical diffraction analysis, and SEM tests. SEM tests were used to explore the hydration properties of the composite gelling. The results show that with an increase in MSWIBA doping, the porosity between the materials increased, the degree of hydration decreased, and the compressive strength decreased. When the sodium silicate concentration increased from 25% to 35%, excessive alkaline material occurred, impacting the alkaline effect. This inhibited particle hydration, leading to a decrease in the degree of hydration and, consequently, the compressive strength. The exothermic process of hydration can be divided into five main stages; quartz and calcite did not fully participate in the hydration reaction, while aluminum did. The vibrational peaks of Si-O-Ti (T = Si and Al) were present in the material. The vibrational peaks of XRD, FTIR, and SEM all indicate the presence of alumosilicate network structures in the hydration products, mainly N-A-S-H and C-A-S-H gels.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- School of Civil Engineering, Chongqing Jiaotong University, Chongqing 400074, China.
- Department of Transportation and Municipal Engineering, Chongqing Jianzhu College, Chongqing 400072, China.
- School of He Hai, Chongqing Jiaotong University, Chongqing 400074, China.
Zitieren
APA
Deng, J., Wu, G., Xia, Y., & Liu, L. (2024). Preparation and Hydration Properties of Sodium Silicate-Activated Municipal Solid Waste Incineration Bottom Ash Composite Ground-Granulated Blast Furnace Slag Cementitious Materials. Materials, 17(10), 2406. https://doi.org/10.3390/ma17102406
Vancouver
Deng J, Wu G, Xia Y, Liu L. Preparation and Hydration Properties of Sodium Silicate-Activated Municipal Solid Waste Incineration Bottom Ash Composite Ground-Granulated Blast Furnace Slag Cementitious Materials. Materials. 2024;17(10):2406. doi:10.3390/ma17102406
BibTeX
@article{Deng2024,
author = {Deng, Juan and Wu, Guoxiong and Xia, Yuchao and Liu, Li},
title = {Preparation and Hydration Properties of Sodium Silicate-Activated Municipal Solid Waste Incineration Bottom Ash Composite Ground-Granulated Blast Furnace Slag Cementitious Materials},
journal = {Materials},
year = {2024},
volume = {17},
number = {10},
pages = {2406},
doi = {10.3390/ma17102406}
}
EUVIMED