EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

An Experimental Study on the Mechanical Properties and Microstructure of the Cemented Paste Backfill Made by Coal-Based Solid Wastes and Nanocomposite Fibers under Dry–Wet Cycling

Haodong Wang, Qiangqiang Cheng, Nan Zhou, Heming Su, Qixiang Yin, Bin Du, Linglei Zhang, Yue Yao

Materials · 10.05.2024 · 17 (10) · 2256

DOI: 10.3390/ma17102256 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Materials, online erschienen am 10.05.2024. Verfasst von Haodong Wang und 7 weiteren Autor:innen. Beteiligte Einrichtung: School of Mining Engineering, China University of Mining and Technology, Xuzhou 221000, China. Die Arbeit wurde bisher 8-mal zitiert (Crossref) und nennt 44 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Key R & D Program Project of China, Key R&D Program Project of Xinjiang Uygur Autonomous Region, National Natural Science Foundation of China.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The mechanical properties and microstructure of the cemented paste backfill (CPB) in dry–wet cycle environments are particularly critical in backfill mining. In this study, coal gangue, fly ash, cement, glass fiber, and nano-SiO2 were used to prepare CPB, and dry–wet cycle tests on CPB specimens with different curing ages were conducted. The compressive, tensile, and shear strength of CPB specimens with different curing ages under different dry–wet cycles were analyzed, and the microstructural damage of the specimens was observed by scanning electron microscopy (SEM). The results show that compared with the specimens without dry–wet cycles, the uniaxial compressive strength, tensile strength, and shear strength of the specimens with a curing age of 7 d after seven dry–wet cycles were the smallest, being reduced by 40.22%, 58.25%, and 66.8%, respectively. After seven dry–wet cycles, the compressive, tensile, and shear strength of the specimens with the curing age of 28 d decreased slightly. The SEM results show that with the increasing number of dry–wet cycles, the internal structure of the specimen becomes more and more loose and fragile, and the damage degree of the structural skeleton gradually increases, leading to the poor mechanical properties of CPB specimens. The number of cracks and pores on the specimen surface is relatively limited after a curing age of 28 d, while the occurrence of internal structural damage within the specimen remains insignificant. Therefore, the dry–wet cycle has an important influence on the both mechanical properties and microstructure of CPB. This study provides a reference for the treatment of coal-based solid waste and facilitates the understanding of the mechanical properties of backfill materials under dry–wet cycling conditions.

Schlagwörter

Stichwörter der Autor:innen

dry–wet cyclemechanical propertiesmicroscopic structurenanofibers

Autor:innen und Institutionen

  • School of Mining Engineering, China University of Mining and Technology, Xuzhou 221000, China.
  • School of Architecture and Construction, Jiangsu Vocational Institute of Architectural Technology, Xuzhou 221000, China.
  • China Shenhua Energy Co Ltd., Beijing 102209, China.

Förderung

  • National Key R & D Program Project of China
  • Key R&D Program Project of Xinjiang Uygur Autonomous Region
  • National Natural Science Foundation of China
  • Jiangsu Province Sixth "333 high-level talents" Third-level training object support third-level training object support (2022)
  • National Key R&D Program Project of China
  • Key R&D Program Project of Xinjiang Uygur Autonomous Region
  • Major Natural Science Research Projects of Colleges and Universities in the Jiangsu Province
  • Jiangsu Province Sixth “333 high-level talents” Third-level training object support third-level training object support (2022)

Zitieren

APA

Wang, H., Cheng, Q., Zhou, N., Su, H., Yin, Q., Du, B., Zhang, L., & Yao, Y. (2024). An Experimental Study on the Mechanical Properties and Microstructure of the Cemented Paste Backfill Made by Coal-Based Solid Wastes and Nanocomposite Fibers under Dry–Wet Cycling. Materials, 17(10), 2256. https://doi.org/10.3390/ma17102256

Vancouver

Wang H, Cheng Q, Zhou N, Su H, Yin Q, Du B, et al. An Experimental Study on the Mechanical Properties and Microstructure of the Cemented Paste Backfill Made by Coal-Based Solid Wastes and Nanocomposite Fibers under Dry–Wet Cycling. Materials. 2024;17(10):2256. doi:10.3390/ma17102256

BibTeX
@article{Wang2024,
  author = {Wang, Haodong and Cheng, Qiangqiang and Zhou, Nan and Su, Heming and Yin, Qixiang and Du, Bin and Zhang, Linglei and Yao, Yue},
  title = {An Experimental Study on the Mechanical Properties and Microstructure of the Cemented Paste Backfill Made by Coal-Based Solid Wastes and Nanocomposite Fibers under Dry–Wet Cycling},
  journal = {Materials},
  year = {2024},
  volume = {17},
  number = {10},
  pages = {2256},
  doi = {10.3390/ma17102256}
}
Kostenlos starten →