Effect of Sb Content on the Microstructure and Mechanical Properties of Eutectic SnPb Solder
Materials · 09.05.2024 · 17 (10) · 2233
DOI: 10.3390/ma17102233 ↗Kurz gefasst
Fachartikel in der Zeitschrift Materials, online erschienen am 09.05.2024. Verfasst von Xiuchen Zhao und 5 weiteren Autor:innen. Beteiligte Einrichtung: School of Materials Science and Engineering, Beijing Institute of Technology, Beijing 100081, China. Die Arbeit wurde bisher 17-mal zitiert (Crossref) und nennt 50 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Natural Science Foundation of China.
Abstract (Originalsprache)
SnPb solder was widely used in electronic packaging for aerospace devices due to its high reliability. However, its creep resistance is poor and can be improved by adding alloying elements. The effects of Sb content on the microstructure, tensile, and creep properties of eutectic SnPb solder were investigated. Sb addition effectively improved the mechanical properties of the SnPb solder. When Sb content exceeds 1.7 wt.%, SbSn intermetallic compounds (IMCs) occurred. And increasing the Sb content increased the tensile strength. Furthermore, Sb addition decreased the steady-state creep rate and increased the stress exponent n, suggesting that the creep resistance had been enhanced, which may be attributed to the hindrance of dislocation movement by SbSn IMCs, as well as the reduction in phase boundaries, which consequently reduced grain boundary sliding.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- School of Materials Science and Engineering, Beijing Institute of Technology, Beijing 100081, China.
- School of Integrated Circuit Science and Engineering, Beihang University, Beijing 100191, China.
- Package R&D Center, Beijing Microelectronics Technology Institute, Beijing 100076, China.
Förderung
- National Natural Science Foundation of China
Zitieren
APA
Zhao, X., Chang, J., Wu, X., Ye, Z. T., Chen, W., & Xie, X. (2024). Effect of Sb Content on the Microstructure and Mechanical Properties of Eutectic SnPb Solder. Materials, 17(10), 2233. https://doi.org/10.3390/ma17102233
Vancouver
Zhao X, Chang J, Wu X, Ye ZT, Chen W, Xie X. Effect of Sb Content on the Microstructure and Mechanical Properties of Eutectic SnPb Solder. Materials. 2024;17(10):2233. doi:10.3390/ma17102233
BibTeX
@article{Zhao2024,
author = {Zhao, Xiuchen and Chang, Jiahui and Wu, Xuefeng and Ye, Zi-Ting and Chen, Weiwei and Xie, Xiaochen},
title = {Effect of Sb Content on the Microstructure and Mechanical Properties of Eutectic SnPb Solder},
journal = {Materials},
year = {2024},
volume = {17},
number = {10},
pages = {2233},
doi = {10.3390/ma17102233}
}
EUVIMED