Data–Physics Fusion-Driven Defect Predictions for Titanium Alloy Casing Using Neural Network
Materials · 09.05.2024 · 17 (10) · 2226
DOI: 10.3390/ma17102226 ↗Kurz gefasst
Fachartikel in der Zeitschrift Materials, online erschienen am 09.05.2024. Verfasst von Peng Yu und 9 weiteren Autor:innen. Beteiligte Einrichtung: School of Materials Science and Engineering, State Key Laboratory of Materials Processing and Die & Mould Technology, Huazhong University of Science …. Die Arbeit wurde bisher 6-mal zitiert (Crossref) und nennt 41 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: the National Natural Science Foundation of China, the National Key R&D Program of China, National Natural Science Foundation of China.
Abstract (Originalsprache)
The quality of Ti alloy casing is crucial for the safe and stable operation of aero engines. However, the fluctuation of key process parameters during the investment casting process of titanium alloy casings has a significant influence on the volume and number of porosity defects, and this influence cannot be effectively suppressed at present. Therefore, this paper proposes a strategy to control the influence of process parameters on shrinkage volume and number. This study constructed multiple regression prediction models and neural network prediction models of porosity volume and number for a ZTC4 casing by simulating the gravity investment casting process. The results show that the multiple regression prediction model and neural network prediction model of shrinkage cavity total volume have an accuracy of over 99%. The accuracy of the neural network prediction model is higher than that of the multiple regression model, and the neural network model realizes the accurate prediction of shrinkage defect volume and defect number through pouring temperature, pouring time, and mold shell temperature. The sensitivity degree of casing defects to key process parameters, from high to low, is as follows: pouring temperature, pouring time, and mold temperature. Further optimizing the key process parameter window reduces the influence of process parameter fluctuation on the volume and number of porosity defects in casing castings. This study provides a reference for actual production control process parameters to reduce shrinkage cavity and loose defects.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- School of Materials Science and Engineering, State Key Laboratory of Materials Processing and Die & Mould Technology, Huazhong University of Science and Technology, Wuhan 430074, China.
- Aeronautical Materials Research Institute, Beijing 100094, China.
Förderung
- the National Natural Science Foundation of China
- the National Key R&D Program of China
- National Natural Science Foundation of China
- National Key R&D Program of China
Zitieren
APA
Yu, P., Ji, X., Sun, T., Zhou, W., Li, W., Xu, Q., Qie, X., Yin, Y., Shen, X., & Zhou, J. (2024). Data–Physics Fusion-Driven Defect Predictions for Titanium Alloy Casing Using Neural Network. Materials, 17(10), 2226. https://doi.org/10.3390/ma17102226
Vancouver
Yu P, Ji X, Sun T, Zhou W, Li W, Xu Q, et al. Data–Physics Fusion-Driven Defect Predictions for Titanium Alloy Casing Using Neural Network. Materials. 2024;17(10):2226. doi:10.3390/ma17102226
BibTeX
@article{Yu2024,
author = {Yu, Peng and Ji, Xiaoyuan and Sun, Tao and Zhou, Wenhao and Li, Wen and Xu, Qian and Qie, Xiwang and Yin, Yajun and Shen, Xu and Zhou, Jianxin},
title = {Data–Physics Fusion-Driven Defect Predictions for Titanium Alloy Casing Using Neural Network},
journal = {Materials},
year = {2024},
volume = {17},
number = {10},
pages = {2226},
doi = {10.3390/ma17102226}
}
EUVIMED