EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

The Waelz Slag from Electric Arc Furnace Dust Processing: Characterization and Magnetic Separation Studies

Pavel Grudinsky iD, Anfisa Yurtaeva, Denis Pankratov iD, Liliya Pasechnik iD, Roman Musaelyan, Valery Dyubanov

Materials · 08.05.2024 · 17 (10) · 2224

DOI: 10.3390/ma17102224 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Materials, online erschienen am 08.05.2024. Verfasst von Pavel Grudinsky und 5 weiteren Autor:innen. Beteiligte Einrichtung: I.P. Bardin Laboratory of Issues of Complex Ore Metallurgy, A.A. Baikov Institute of Metallurgy and Materials Science, Russian Academy of Science, 49…. Die Arbeit wurde bisher 15-mal zitiert (Crossref) und nennt 80 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Russian Science Foundation.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The Waelz slag generated during electric arc furnace dust processing is an iron-rich product with significant amounts of iron, zinc and copper. About 600–800 kg of the Waelz slag is generated per ton of the dust processed. The Waelz slag samples from two different plants were thoroughly characterized using inductively coupled plasma optical emission spectroscopy (ICP-AES), X-ray diffraction analysis (XRD), chemical phase analysis, Mössbauer spectroscopy and other supporting methods. The phase distribution of iron, zinc and copper was determined in the Waelz slag samples. Low-intensity wet magnetic separation was tested for the iron recovery from the Waelz slag samples. It was found that the Waelz slag samples have complex chemical and mineralogical compositions, which can impede the selective recovery of valuable elements. The obtained results indicate that the chemical and mineralogical composition of the Waelz slag samples has a considerable effect on the magnetic separation indexes. The experiments showed that the iron concentrates with Fe contents of 73% and 46.8% with the metallization degrees of 87.2% and 57.5% and the iron recovery degree of 54.8% and 52.9% were obtained at optimal conditions for two different samples, respectively, without selective segregation of Cu and Zn in the magnetic or non-magnetic fraction.

Schlagwörter

Stichwörter der Autor:innen

Mössbauer spectroscopyWaelz slagcopperelectric arc furnace dustironmagnetic separationzinc

Autor:innen und Institutionen

  • I.P. Bardin Laboratory of Issues of Complex Ore Metallurgy, A.A. Baikov Institute of Metallurgy and Materials Science, Russian Academy of Science, 49 Leninsky Prosp, 119334 Moscow, Russia.
  • Faculty of Biotechnology and Industrial Ecology, D. Mendeleev University of Chemical Technology of Russia, 9 Miusskaya Square, 125047 Moscow, Russia.
  • Department of Radiochemistry, Faculty of Chemistry, Lomonosov Moscow State University, 1-3 Leninskiye Gory, 119991 Moscow, Russia.
  • Institute of Solid State Chemistry, Ural Branch of the Russian Academy of Sciences, 91 Pervomaiskaya St., 620990 Ekaterinburg, Russia.
  • FRC V.V. Dokuchaev Soil Science Institute, 7 bdg. 2 Pyzhevsky Lane, 119017 Moscow, Russia.

ORCID-Profile: Pavel Grudinsky, Denis Pankratov, Liliya Pasechnik

Förderung

  • Russian Science Foundation

Zitieren

APA

Grudinsky, P., Yurtaeva, A., Pankratov, D., Pasechnik, L., Musaelyan, R., & Dyubanov, V. (2024). The Waelz Slag from Electric Arc Furnace Dust Processing: Characterization and Magnetic Separation Studies. Materials, 17(10), 2224. https://doi.org/10.3390/ma17102224

Vancouver

Grudinsky P, Yurtaeva A, Pankratov D, Pasechnik L, Musaelyan R, Dyubanov V. The Waelz Slag from Electric Arc Furnace Dust Processing: Characterization and Magnetic Separation Studies. Materials. 2024;17(10):2224. doi:10.3390/ma17102224

BibTeX
@article{Grudinsky2024,
  author = {Grudinsky, Pavel and Yurtaeva, Anfisa and Pankratov, Denis and Pasechnik, Liliya and Musaelyan, Roman and Dyubanov, Valery},
  title = {The Waelz Slag from Electric Arc Furnace Dust Processing: Characterization and Magnetic Separation Studies},
  journal = {Materials},
  year = {2024},
  volume = {17},
  number = {10},
  pages = {2224},
  doi = {10.3390/ma17102224}
}
Kostenlos starten →