EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Effect of Geopolymerization Reaction on the Flexural Strength of Kaolin-Based Systems

Binghuan Gao iD, Yangyang Li, Seongwan Jang, Hyeonjin Son, Heesoo Lee, Chang-Jun Bae

Materials · 08.05.2024 · 17 (10) · 2223

DOI: 10.3390/ma17102223 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Materials, online erschienen am 08.05.2024. Verfasst von Binghuan Gao und 5 weiteren Autor:innen. Beteiligte Einrichtung: Department of 3D Printing Materials, Korea Institute of Materials Science (KIMS), Changwon 51508, Republic of Korea. Die Arbeit wurde bisher 14-mal zitiert (Crossref) und nennt 39 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Research Foundation of Korea, Korea Energy Technology Evaluation and Planning.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Geopolymers exhibit broad application prospects, including construction and radiation shielding, which require excellent mechanical performances. However, investigations on the nature of geopolymerization reactions and their consequential impact on mechanical performance are still vague. In this study, the effect of the major factors of Si/Al ratio and curing time on the geopolymerization reaction and flexural strength were studied based on the microstructure evolution and chemical bonding formation analyzed using the SEM, FTIR, peak deconvolution, and XRD methods. The microstructure of geopolymers was transferred from initially layered smooth particles of kaolinite to a 3D network porous structure, corresponding to sodalite. A spectrum exclusive to the geopolymer structure occurred at 973 cm−1, corresponding to the sodium aluminum silicate hydrate (N-A-S-H) links, the integral area of which represents the degree of geopolymerization reaction. Furthermore, a controllable reaction degree was achieved by adjusting the Si/Al ratio and curing time, where the maximum reaction degree of 55% was achieved at a Si/Al ratio of 1.94 when cured for 7 d. The correlation between the flexural strength and reaction degree was found to follow a proportional relationship, achieving a flexural strength of 21.11 MPa with a degree of 45%. This study provides insight into the development of mechanical strength through controlling the reaction process.

Schlagwörter

Stichwörter der Autor:innen

N-A-S-H linksflexural strengthgeopolymerization reactionreaction degree

Autor:innen und Institutionen

  • Department of 3D Printing Materials, Korea Institute of Materials Science (KIMS), Changwon 51508, Republic of Korea.
  • Department of Materials Science and Engineering, Pusan National University, Busan 46241, Republic of Korea.
  • Department of Advanced Materials Engineering, University of Science & Technology (UST), Daejeon 34113, Republic of Korea.

ORCID-Profile: Binghuan Gao

Förderung

  • National Research Foundation of Korea
  • Korea Energy Technology Evaluation and Planning

Zitieren

APA

Gao, B., Li, Y., Jang, S., Son, H., Lee, H., & Bae, C. J. (2024). Effect of Geopolymerization Reaction on the Flexural Strength of Kaolin-Based Systems. Materials, 17(10), 2223. https://doi.org/10.3390/ma17102223

Vancouver

Gao B, Li Y, Jang S, Son H, Lee H, Bae CJ. Effect of Geopolymerization Reaction on the Flexural Strength of Kaolin-Based Systems. Materials. 2024;17(10):2223. doi:10.3390/ma17102223

BibTeX
@article{Gao2024,
  author = {Gao, Binghuan and Li, Yangyang and Jang, Seongwan and Son, Hyeonjin and Lee, Heesoo and Bae, Chang-Jun},
  title = {Effect of Geopolymerization Reaction on the Flexural Strength of Kaolin-Based Systems},
  journal = {Materials},
  year = {2024},
  volume = {17},
  number = {10},
  pages = {2223},
  doi = {10.3390/ma17102223}
}
Kostenlos starten →