EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Inductive Heating of Ceramic Matrix Composites (CMC) for High-Temperature Applications

Alexander Hackert iD, Jonas H M Stiller iD, Johannes Winhard iD, Václav Kotlan iD, Daisy Nestler iD

Materials · 07.05.2024 · 17 (10) · 2175

DOI: 10.3390/ma17102175 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Materials, online erschienen am 07.05.2024. Verfasst von Alexander Hackert und 4 weiteren Autor:innen. Beteiligte Einrichtung: Professorship Forming Technology, Department of Mechanical Engineering, Chemnitz University of Technology, 09107 Chemnitz, Germany. Die Arbeit wurde bisher 5-mal zitiert (Crossref) und nennt 31 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The inductive heating of a CMC susceptor for industrial applications can generate very high process temperatures. Thus, the behavior of a silicon carbide-based matrix with carbon-fiber-reinforced carbon (C/C-SiC) as a susceptor is investigated. Specifically, the influence of fiber length and the distribution of carbon fibers in the composite were investigated to find out the best parameters for the most efficient heating. For a multi-factorial set of requirements with a combination of filling levels and fiber lengths, a theoretical correlation of the material structure can be used as part of a digital model. Multi-physical simulation was performed to study the behavior of an alternating magnetic field generated by an inducing coil. The simulation results were verified by practical tests. It is shown that the inductive heating of a C/C-SiC susceptor can reach very high temperatures in a particularly fast and efficient way without oxidizing if it is ensured that a silicon carbide-based matrix completely encloses the fibers.

Schlagwörter

Stichwörter der Autor:innen

carbon fiberceramic matrix compositecompositehigh temperature applicationinduction heatingsilicon carbide

Autor:innen und Institutionen

  • Professorship Forming Technology, Department of Mechanical Engineering, Chemnitz University of Technology, 09107 Chemnitz, Germany.
  • Funded Research Group Textile Plastic Composites and Hybrid Compounds, Department of Mechanical Engineering, Chemnitz University of Technology, 09107 Chemnitz, Germany.
  • Regional Innovation Centre for Electrical Engineering, University of West Bohemia, 306 14 Pilsen, Czech Republic.

ORCID-Profile: Alexander Hackert, Jonas H M Stiller, Johannes Winhard, Václav Kotlan, Daisy Nestler

Zitieren

APA

Hackert, A., Stiller, J. H. M., Winhard, J., Kotlan, V., & Nestler, D. (2024). Inductive Heating of Ceramic Matrix Composites (CMC) for High-Temperature Applications. Materials, 17(10), 2175. https://doi.org/10.3390/ma17102175

Vancouver

Hackert A, Stiller JHM, Winhard J, Kotlan V, Nestler D. Inductive Heating of Ceramic Matrix Composites (CMC) for High-Temperature Applications. Materials. 2024;17(10):2175. doi:10.3390/ma17102175

BibTeX
@article{Hackert2024,
  author = {Hackert, Alexander and Stiller, Jonas H M and Winhard, Johannes and Kotlan, Václav and Nestler, Daisy},
  title = {Inductive Heating of Ceramic Matrix Composites (CMC) for High-Temperature Applications},
  journal = {Materials},
  year = {2024},
  volume = {17},
  number = {10},
  pages = {2175},
  doi = {10.3390/ma17102175}
}
Kostenlos starten →