EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Functionalized γ-Boehmite Covalent Grafting Modified Polyethylene for Lithium-Ion Battery Separator

Yuanxin Man, Hui Nan, Jianzhe Ma, Zhike Li, Jingyuan Zhou, Xianlan Wang, Heqi Li, Caihong Xue iD, Yongchun Yang

Materials · 06.05.2024 · 17 (9) · 2162

DOI: 10.3390/ma17092162 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Materials, online erschienen am 06.05.2024. Verfasst von Yuanxin Man und 8 weiteren Autor:innen. Beteiligte Einrichtung: Qinghai Provincial Key Laboratory of New Light Alloys, School of Mechanical Engineering, Qinghai University, Xining 810016, China. Die Arbeit wurde bisher 13-mal zitiert (Crossref) und nennt 51 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Project of transformation of achievements of Qinghai provincial department of Science and Technology, Natural Science Foundation of Sichuan Province, Innovative Entrepreneurship Training Program for college students of Qinghai University.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

In the field of lithium-ion batteries, the challenges posed by the low melting point and inadequate wettability of conventional polyolefin separators have increased the focus on ceramic-coated separators. This study introduces a highly efficient and stable boehmite/polydopamine/polyethylene (AlOOH-PDA-PE) separator. It is crafted by covalently attaching functionalized nanosized boehmite (γ-AlOOH) whiskers onto polyethylene (PE) surfaces. The presence of a covalent bond increases the stability at the interface, while amino groups on the surface of the separator enhance the infiltration of the electrolyte and facilitate the diffusion of lithium ions. The PE-PDA-AlOOH separator, when used in lithium-ion batteries, achieves a discharge capacity of 126 mAh g−1 at 5 C and retains 97.1% capacity after 400 cycles, indicating superior cycling stability due to its covalently bonded ceramic surface. Thus, covalent interface modification is a promising strategy to prevent delamination of ceramic coatings in separators.

Schlagwörter

Stichwörter der Autor:innen

covalent graftinghigh electrolyte affinityinterfacial engineeringγ-boehmite

Autor:innen und Institutionen

  • Qinghai Provincial Key Laboratory of New Light Alloys, School of Mechanical Engineering, Qinghai University, Xining 810016, China.
  • Qinghai Beijie New Material Technology Co., Ltd., Xining 810016, China.
  • School of Materials Science and Engineering, Harbin Institute of Technology, Harbin 150080, China.
  • Qinghai Institute of Science and Technology Information Co., Ltd., Xining 810016, China.

ORCID-Profile: Caihong Xue

Förderung

  • Project of transformation of achievements of Qinghai provincial department of Science and Technology
  • Natural Science Foundation of Sichuan Province
  • Innovative Entrepreneurship Training Program for college students of Qinghai University
  • project of transformation of achievements of the Qinghai Provincial Department of Science and Technology

Zitieren

APA

Man, Y., Nan, H., Ma, J., Li, Z., Zhou, J., Wang, X., Li, H., Xue, C., & Yang, Y. (2024). Functionalized γ-Boehmite Covalent Grafting Modified Polyethylene for Lithium-Ion Battery Separator. Materials, 17(9), 2162. https://doi.org/10.3390/ma17092162

Vancouver

Man Y, Nan H, Ma J, Li Z, Zhou J, Wang X, et al. Functionalized γ-Boehmite Covalent Grafting Modified Polyethylene for Lithium-Ion Battery Separator. Materials. 2024;17(9):2162. doi:10.3390/ma17092162

BibTeX
@article{Man2024,
  author = {Man, Yuanxin and Nan, Hui and Ma, Jianzhe and Li, Zhike and Zhou, Jingyuan and Wang, Xianlan and Li, Heqi and Xue, Caihong and Yang, Yongchun},
  title = {Functionalized γ-Boehmite Covalent Grafting Modified Polyethylene for Lithium-Ion Battery Separator},
  journal = {Materials},
  year = {2024},
  volume = {17},
  number = {9},
  pages = {2162},
  doi = {10.3390/ma17092162}
}
Kostenlos starten →