EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Mechanistic Study of Failure in CFRP Hybrid Bonded–Bolted Interference Connection Structures under Tensile Loading

Bin Luo, Liyang Xue, Qingsong Wang, Peng Zou

Materials · 30.04.2024 · 17 (9) · 2117

DOI: 10.3390/ma17092117 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Materials, online erschienen am 30.04.2024. Verfasst von Bin Luo und 3 weiteren Autor:innen. Beteiligte Einrichtung: School of Mechanical Engineering, Northwestern Polytechnical University, Xi'an 710072, China. Die Arbeit wurde bisher 11-mal zitiert (Crossref) und nennt 39 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Natutral Science Foundation of China, Natural Science Foundation of Shaanxi Province, National Natural Science Foundation of China.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Hybrid bonded–bolted composite material interference connections significantly enhance the collaborative load-bearing capabilities of the adhesive layer and bolts, thus improving structural load-carrying capacity and fatigue life. So, these connections offer significant developmental potential and application prospects in aircraft structural assembly. However, interference causes damage to the adhesive layer and composite laminate around the holes, leading to issues with interface damage. In this study, we employed experimental and finite element methods. Initially, different interference-fit sizes were selected for bolt insertion to analyze the damage mechanism of the adhesive layer during interference-fit bolt installation. Subsequently, a finite element tensile model considering damage to the adhesive layer and composite laminate around the holes post-insertion was established. This study aimed to investigate damage in composite bonded–bolted hybrid joints, explore load-carrying rules and failure modes, and reveal the mechanisms of interference effects on structural damage and failure. The research results indicate that the finite element prediction model considering initial damage around the holes is more effective. As the interference-fit size increases, damage to the adhesive layer transitions from surface debonding to local cracking, while damage to the composite matrix shifts from slight compression failure to severe delamination and fiber-bending fracturing. The structural strength shows a trend of initially increasing and then decreasing, with the maximum strength observed at an interference-fit size of 1.1%.

Schlagwörter

Stichwörter der Autor:innen

composite materialfailure mechanismhybrid bonded–boltedinterference fittensile load

Autor:innen und Institutionen

  • School of Mechanical Engineering, Northwestern Polytechnical University, Xi'an 710072, China.
  • AVIC Chengdu Aircraft Industrial (Group) Company, Chengdu 610041, China.
  • Aircraft Strength Research Institute of China, Xi'an 710065, China.

Förderung

  • National Natutral Science Foundation of China
  • Natural Science Foundation of Shaanxi Province
  • National Natural Science Foundation of China

Zitieren

APA

Luo, B., Xue, L., Wang, Q., & Zou, P. (2024). Mechanistic Study of Failure in CFRP Hybrid Bonded–Bolted Interference Connection Structures under Tensile Loading. Materials, 17(9), 2117. https://doi.org/10.3390/ma17092117

Vancouver

Luo B, Xue L, Wang Q, Zou P. Mechanistic Study of Failure in CFRP Hybrid Bonded–Bolted Interference Connection Structures under Tensile Loading. Materials. 2024;17(9):2117. doi:10.3390/ma17092117

BibTeX
@article{Luo2024,
  author = {Luo, Bin and Xue, Liyang and Wang, Qingsong and Zou, Peng},
  title = {Mechanistic Study of Failure in CFRP Hybrid Bonded–Bolted Interference Connection Structures under Tensile Loading},
  journal = {Materials},
  year = {2024},
  volume = {17},
  number = {9},
  pages = {2117},
  doi = {10.3390/ma17092117}
}
Kostenlos starten →