EUVIMEDEUVIMED entdecken
ÜbersichtsarbeitOpen Access · CC BY 4.0

Progress and Challenges of Additive Manufacturing of Tungsten and Alloys as Plasma-Facing Materials

Logan Howard, Gabriel D Parker, Xiao-Ying Yu iD

Materials · 29.04.2024 · 17 (9) · 2104

DOI: 10.3390/ma17092104 ↗

Kurz gefasst

Übersichtsarbeit in der Zeitschrift Materials, online erschienen am 29.04.2024. Verfasst von Logan Howard und 2 weiteren Autor:innen. Beteiligte Einrichtung: Materials Science and Technology Division, Oak Ridge National Laboratory, Oak Ridge, TN 37830, USA. Die Arbeit wurde bisher 41-mal zitiert (Crossref) und nennt 164 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Department of Energy, Office of Fusion Energy Sciences (FES),, Office of Fusion Energy Sciences (FES), U.S. Department of Energy (DOE).

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Tungsten (W) and W alloys are considered as primary candidates for plasma-facing components (PFCs) that must perform in severe environments in terms of temperature, neutron fluxes, plasma effects, and irradiation bombardment. These materials are notoriously difficult to produce using additive manufacturing (AM) methods due to issues inherent to these techniques. The progress on applying AM techniques to W-based PFC applications is reviewed and the technical issues in selected manufacturing methods are discussed in this review. Specifically, we focus on the recent development and applications of laser powder bed fusion (LPBF), electron beam melting (EBM), and direct energy deposition (DED) in W materials due to their abilities to preserve the properties of W as potential PFCs. Additionally, the existing literature on irradiation effects on W and W alloys is surveyed, with possible solutions to those issues therein addressed. Finally, the gaps in possible future research on additively manufactured W are identified and outlined.

Schlagwörter

Stichwörter der Autor:innen

additive manufacturing (AM)direct energy deposition (DED)electron beam melting (EBM)irradiation effectslaser powder bed fusion (LPBF)tungsten (W)

Autor:innen und Institutionen

  • Materials Science and Technology Division, Oak Ridge National Laboratory, Oak Ridge, TN 37830, USA.
  • The Bredesen Center, 310 Ferris Hall 1508 Middle Dr, Knoxville, TN 37996, USA.

ORCID-Profile: Xiao-Ying Yu

Förderung

  • Department of Energy, Office of Fusion Energy Sciences (FES),
  • Office of Fusion Energy Sciences (FES), U.S. Department of Energy (DOE)

Zitieren

APA

Howard, L., Parker, G. D., & Yu, X. Y. (2024). Progress and Challenges of Additive Manufacturing of Tungsten and Alloys as Plasma-Facing Materials. Materials, 17(9), 2104. https://doi.org/10.3390/ma17092104

Vancouver

Howard L, Parker GD, Yu XY. Progress and Challenges of Additive Manufacturing of Tungsten and Alloys as Plasma-Facing Materials. Materials. 2024;17(9):2104. doi:10.3390/ma17092104

BibTeX
@article{Howard2024,
  author = {Howard, Logan and Parker, Gabriel D and Yu, Xiao-Ying},
  title = {Progress and Challenges of Additive Manufacturing of Tungsten and Alloys as Plasma-Facing Materials},
  journal = {Materials},
  year = {2024},
  volume = {17},
  number = {9},
  pages = {2104},
  doi = {10.3390/ma17092104}
}
Kostenlos starten →